Minleon C9 Pixels
 
Notifications
Clear all

Minleon C9 Pixels

30 Posts
12 Users
0 Reactions
8,297 Views
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I've heard of the minleon pixels working great with the sandevices controllers. but last I checked, that was the only 3rd party controller it worked with.

I'd also like to +1 on the pixabulbs. I've got over 600 now, some are in their 2nd season. only one failure so far (one pixel, no blue)
Like Tim, I also have 10" and 12" spacing. You can custom order them in 2" increments in the presales. But as he mentioned. it's not center to center measurement, it's wire length between bulbs. so by the time you add the bulb base dimension, that adds almost another inch. It's also not exactly 10" and 12" (or 2" increments) They're actually made in 50mm increments, so 10" is 250mm, and 12" is 300mm. It's close, but not exact. So if that matters to you, just be aware of it.


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

I have run my minleon strings off the E6804, they work great, look fabulous. However I bought minleon controllers for them anyways. Minleon now has a WS2811 controller as well. The pixabulbs with the faceted bulb did not rock my world (nor the wife) like the frosted Minleon did, they've been up in the "mega tree" for weeks now through two NASTY wind storms, lots of rain and work fabulous still.

I've also heard on the boards here that the Pixabulbs will yellow a bit, but that won't affect their color in reality, I know the minleon wires are UV protected and the bulbs are polystyrene injection molds. For my house outline will be ordering some Minleon C9 even at $2.00 a bulb!


Reply
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

So what is the minleon controller needed for say, 1000 bulbs on my roof? Who do we buy these from in the u.s.a.? What is the standard spacing on the nodes?

Louie


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

an NDB controller with a big enough power supply would handle that many, it has 16 outputs and can use smart T's on top of that.

NorthernSkyLighting.com on the east coast (click shop), or if you are out on the west coast teklights.com

Pop over on the facebook group for LSP and hook up with Ron and I'm sure he can make you a package deal to get you going.


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

Seasonal Entertainment has a similar designed pixel and they are priced a little better. I don't think I've run across a thread where they've had issues. If Minleon wants to price their pixels like LOR does...they're missing out on a LOT of business....but, DIYledexpress.com likes it 🙂


Reply
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago

I have 400 pixabulbs on their second year with no failures. Last year the guys at diyledexpress offered custom order spacing during their presale. I'm not sure if they are again this year or not, you have to ask them.

Sent from my SAMSUNG-SM-G900A using Tapatalk 2


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

Also, DIYLedexpress just announced their presale will be in January...I think it was January 2 - January 31 with prices to be listed on their site Dec 28\


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

Minleon builds for the commercial market, DIY is not a market they are after. Although you and I and our brethen here think we are a "large" market, think of the Olympics buildings or a Mall in Germany buying tens of thousands of pixels and you get that our few thousand is a blip in their production. I spent the money because they last, and my time is a worth more to me than $1.00 a bulb over the next few years, I don't want to be out there in -10 pulling down a strand because I saved $50.00!

Alan


Reply
Posts: 5
Topic starter
(@brunnesa)
Active Member
Joined: 19 years ago
arw01 wrote:Minleon builds for the commercial market, DIY is not a market they are after. Although you and I and our brethen here think we are a "large" market, think of the Olympics buildings or a Mall in Germany buying tens of thousands of pixels and you get that our few thousand is a blip in their production. I spent the money because they last, and my time is a worth more to me than $1.00 a bulb over the next few years, I don't want to be out there in -10 pulling down a strand because I saved $50.00!

Alan

Alan,
How are you controlling your Minleon Pixels? Where did you buy them?


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

I have bought from 3 different suppliers looking for one with support and technical knowledge.

Where I buy from now is Ron at NorthernSkylighting.com and hit shop. Get in tough with him and make up a package deal. Minleon is pretty strict with their resellers, but you can make a deal so don't let the list prices completely scare you off.

for controlling my "mega tree" which is 32 strands of 25 with 2 per string so I have 16 strings of 50 I used their NDB controller (about $90) that can handle that many (it has 16 outputs) and a 350 watt power supply. I'm right at the limit on the power supply, but it is living for the moment.

I have controlled them in testing with a E6804 from San Devices and I've heard they (san devices) have the same 12 bit dimming as the Minleon controllers do with those chip types.

next year I will increase my count of lights on the tree so will likely add an effects controller and a second NDB so I can split the amps a bit. Minleon also has smart T's which lets you do some interesting things as well, and to minimize the cabling a little on the tree I used a few of those here and there.

With the second NDB I will run a cable (maybe with the send receive pair) to my roofline from the mega tree and run all my C9's that I want to run along the top of the gutter from that NDB. at 6" spacing I doubt I will even need power injection, but maybe at the middle point and just use a smart T.

Alan


Reply
Page 2 / 3
Share: