Mini trees and pixe...
 
Notifications
Clear all

Mini trees and pixels

8 Posts
6 Users
0 Reactions
3,428 Views
JasonPortwood
Posts: 753
Topic starter
(@jasonportwood)
Noble Member
Joined: 17 years ago
[#31288]

I'm going to build 4 mini trees with WS2811 pixels this year. I plan on using tomato cages and garland. I posted a question on the nutcracker forum but I thought I'd post something over here too. I think this post is a little clearer too...

For the actual display piece I was thinking of treating it like a mega tree but just smaller of course. I would only have the lights be on the tree in an 180 degree arc or maybe even 270. That way I can save on lights and not waste them on showing them to the "house". I've never built a mini tree so I'm wondering if that is the best way or should I just spiral the lights on the tree?

That and how would you represent the lights in a spiral in xlights? Or is like a mega tree the best?

Also for the pixels themselves. Which is better for a mini tree the bullets or the squares? I plan on using WS2811 12v. With 84 lights per tree. With 4 trees that

Thanks for any help

Jason


7 Replies
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

If anything I would say run them up - down the tree in vertical lines, then they should align to the models in XLights. If you wrap them around then you may need to custom model the tree's to get the effects to show up correctly. I would figure out how tall they will be then figure out how many strings of lights to put on them, so if you had a 3' tree with lights spaced 4 3/4" you would have between 7 or 8 lights up / down in each row, and if you wanted 12 rows, then 7 x 12 would be your 84 lights.

The type of lights is whatever you prefer there, like anything pros and cons to everything. Myself on a tree I like the bullets, find they look the best on a tree. On a wire frame or something I like the squares better. Again, all a matter of personal choice there.


Reply
Posts: 1792
(@barbotte)
Noble Member
Joined: 17 years ago

i did many mini tree but never with pixel.. my best one are made with dum rgb and coro as i cannot see pixel making a big effect as the tree is so small ..if i had to do 1 with tomato cagei think i would go up and down many time and not around the tomato cage ... as for pixel i would used the sqare one (wire comiing the back in 45 degrre) as the bullet type i think would put to much pressure pulling the wire... letting water in ..the best desing would be the technicolor style but too many people last year had problem with them and they are more $$$ 55 cent compare to 38 cent for the square one good luck as i am sure some people hav done it


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago

Here is a short video of my tomato cage trees. I used 3 cages and had 6 pixels running vertically on each leg going down the tree for a total of 48 pixels. Hindsight being what it is I should have used more pixels. The spacing was too far apart and some of the effects lost their luster.


Reply
Posts: 187
(@qbert-pns)
Reputable Member
Joined: 13 years ago

I wish I had Todd's Time. LOL
I concur.


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago
Qbert-PNS wrote:I wish I had Todd's Time. LOL
I concur.

No you don't. I spend 60-70 hours per week working. With the remaining "free" time I take care of my daughter because my wife and I work opposite shifts. Add in soccer and softball for our daughter and there isn't a whole lot of time. There's a reason I shut down the store in November. I need to get my own stuff done!


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago
tjetzer wrote:No you don't. I spend 60-70 hours per week working. With the remaining "free" time I take care of my daughter because my wife and I work opposite shifts. Add in soccer and softball for our daughter and there isn't a whole lot of time. There's a reason I shut down the store in November. I need to get my own stuff done!

We all appreciate it very much Todd and the great job you do!


Reply
Posts: 115
(@loveroflife96)
Estimable Member
Joined: 16 years ago

I did Smart Pixel Mini Trees....used 36" tomato cages with 100 bullet pixels on each cage wrapped around in a spiral pattern with cheap green garland. I only used them like "dumb" pixels last year, but at least you can see the density if you decide to go this route. You can see what they look like here. They are the mini trees that line each side of the driveway.

Thinking about trying to do vertical mounting this year by stacking two tomato cages on top of each other to give me more vertical supports to tie down too. Depends on my time constraints if it happens or not. I'd like to be able to do some cool Nutcracker effects with them. We'll see if it happens in 2014.

Duane


Reply
Share: