Melted power input
 
Notifications
Clear all

Melted power input

12 Posts
7 Users
0 Reactions
3,333 Views
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago
BLarson wrote:I have a Alphapix 16 and one of the two power inlet lugs melted. 1) can this be fixed and if so where can I buy the little lug? And 2) what causes this and how do I prevent it from happening again? I’m kinda a noob to all of this so please forgive me.
Thanks in advance!

1. Yes it can be fixed. You will have to find out the proper size of the terminal block order it (amazon, e-bay), de-solder it, remove, solder in the new one. Or you could contact Dave at Holiday-Coro (assuming that is where you bought it) and ask for advice on repair.
2. Good question. The answer you will have to find. Was it power overload? Do a power analysis on how much power you are using on that side of the board. Are you overloading that side?
Was it a loose connection? may not be able to answer that now but something to watch for in the future.
Was it a stray wire from that side making contact with the positive side? Could have been but may be hard to prove now. This is something I have been guilty of but on a output on a RPTR24. Stray wire making contact from Hot to neutral fried a Triac on board. Wire ferrules prevent stay wires. I personally don't use them on Power inputs. I do however use a fuse between PSU and my controller.
I do use power injection but only on my Mega tree. Lots of strings in very close to one another.
I have a friend who just started in this hobby this year and he ask me for some help getting things going. He bought everything from Holiday Coro including the Alphapix16 like yours. I knew nothing about it at the time but have come to really like it. He used 18awg alarm wire and went as far as 28' to star on tree and it runs like a champ.
Anyway, sorry this has happened to you this close to Christmas. Good reason for backups. Do you have a way to replace it, maybe someone could loan you something to get you back up and running until you can get it fixed?
The Great part about this Hobby is DIY. We all do things the way we feel comfortable doing them. Some want everything wireless, others don't. Some want 100 mini controllers all over the place, others don't. The longer you stay in this hobby the better you get at doing things the way You find Work for You, and easier, I have. This is my 6th year and almost everything I started with I have changed at least once, or I have completely done away with, It Happens.


Reply
Posts: 50
Topic starter
(@blarson)
Trusted Member
Joined: 11 years ago
rayhjr wrote:1. Yes it can be fixed. You will have to find out the proper size of the terminal block order it (amazon, e-bay), de-solder it, remove, solder in the new one. Or you could contact Dave at Holiday-Coro (assuming that is where you bought it) and ask for advice on repair.
2. Good question. The answer you will have to find. Was it power overload? Do a power analysis on how much power you are using on that side of the board. Are you overloading that side?
Was it a loose connection? may not be able to answer that now but something to watch for in the future.
Was it a stray wire from that side making contact with the positive side? Could have been but may be hard to prove now. This is something I have been guilty of but on a output on a RPTR24. Stray wire making contact from Hot to neutral fried a Triac on board. Wire ferrules prevent stay wires. I personally don't use them on Power inputs. I do however use a fuse between PSU and my controller.
I do use power injection but only on my Mega tree. Lots of strings in very close to one another.
I have a friend who just started in this hobby this year and he ask me for some help getting things going. He bought everything from Holiday Coro including the Alphapix16 like yours. I knew nothing about it at the time but have come to really like it. He used 18awg alarm wire and went as far as 28' to star on tree and it runs like a champ.
Anyway, sorry this has happened to you this close to Christmas. Good reason for backups. Do you have a way to replace it, maybe someone could loan you something to get you back up and running until you can get it fixed?
The Great part about this Hobby is DIY. We all do things the way we feel comfortable doing them. Some want everything wireless, others don't. Some want 100 mini controllers all over the place, others don't. The longer you stay in this hobby the better you get at doing things the way You find Work for You, and easier, I have. This is my 6th year and almost everything I started with I have changed at least once, or I have completely done away with, It Happens.

I was able to desolder one from a back up board I had and swapped it out. I found the terminals were way to loose which likely caused the problem. Thanks for everyone’s help.


Reply
Page 3 / 3
Share: