Mega tree controlle...
 
Notifications
Clear all

Mega tree controller

14 Posts
5 Users
0 Reactions
5,075 Views
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Here is the 6804 pixel count:
E1.31 Multicast, up to 7 universes (up 1,190 pixels)
E1.31 Unicast, up to 12 universes (up to 2,040 pixels)
Art-Net, up to 12 universes (up to 2.040 pixels)

Sent from my SM-T710 using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

I use all outputs of a 682. 16 strings 55-12 volt pixels each. I thought of using 1 output per 110 pixels but decided if there was an issue with any of the pixels I have 2 more strings as backup. It's easier just to unhook at the top, replace string, raise...done.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

https://1drv.ms/i/s!ApgRhyoQKfS8hYhkwPfZdmgwxKDKFQ

Not the cable I was looking for but the same concept. Green and gray wires on both ends go to power supply. The red and black pixel wire goes to the pixel controller ground and data. If you zoom in you can see the data, blue wire is jumped, also data jumped at top. These were 3 pin connectors.


Reply
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago

Thanks for the picture looks pretty much like I thought.


Reply
Page 3 / 3
Share: