So I think I have everything I need for my megatree. It's going to be 10 foot tall with 16 strings of 50 12 volt bullet pixels. I'm planning on using a sansdevice e6804 to control the lights. I'm assuming this controller can handle 2000 pixels. If I'm using 800 pixels do I split them evenly among the 4 channels Or max out each channel at 500 pixels or would it be that much easier to get a 16 channel controller? I know I'll probably have to power inject with the e6804. Thanks for your opinions.
My mega tree and my pixel trees use strings of 120 12v pixels. i ran each of them off one output of an F16v2 last year. My mega tree is twice the height of my pixel trees. I use 2 strands per string on the mega and 4 strands per string on the pixel trees. I'm not into power injection or I could run more of them per output. Just another option using a different controller.
I did a 16 by 50 tree with a 6804. I used 2 outputs of 400 pixels each.
Doug, did you have to power inject and if so how often?
The way I do my trees is, I only jumper data at the top. I then hook up ground and power at the bottom of all the strings. I also jumper data at the bottom as needed.
