Notifications
Clear all

Mega tree

4 Posts
4 Users
2 Reactions
749 Views
Posts: 3
Topic starter
(@countryboy96)
Active Member
Joined: 4 years ago
[#58289]

I am planning on doing a small mega tree. 16 strands of 50 pixels coming out of one port for the tree and looping around and a second port for the star. 5v pixels that will be injected every 100. What suggestions for a star? Also if my house and garage are both using digquads to run them would you suggest a digquad for the tree or something different? Thanks for the help!


3 Replies
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

you should break the main string into two strings. you are not going to like the delay in pixel updates at the end of the string.


Reply
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

I would also use two ports for the tree but 800 pixels is well within 20 fps. If you want to go 40fps, you will need to break the 800 down to two ports as well.

Digquad would work good. Assuming you are running sequences, are you using the digquad with sdcard, ethernet or wifi? Suggest the sdcard version or ethernet option. WiFi version way back of either of those.


Reply
Posts: 75
(@mark-m)
Trusted Member
Joined: 3 years ago

DigQuad for the mega tree should work.

I run 3 ports of 800 pixels for my mega tree (2,400 pixels) and the 4th port does my 166 pixel star. Limited to 20FPS.
Personally I would use more pixel ports for the mega tree. Maybe down to 400 pixels per port.


Reply
Share: