limiting factor for...
 
Notifications
Clear all

limiting factor for first pixel?

8 Posts
7 Users
0 Reactions
2,378 Views
Posts: 88
(@matree)
Trusted Member
Joined: 14 years ago

It really depends on the type and quality of the cable. "true" 18awg cable will perform better than most chinese cable that is advertised at 18awg. China does not use the American Wire Gauge even though they often list a cable as 18 guage or 20 gauge, etc.

In china they make cable to the metric system and most of the cable we get is 0.50mm^2 or 0.75mm^2 which falls between 24awg-20awg.

With true 18awg cable, I believe 40' may be possible. But with chineese 0.5 or 0.75 cable the max distance between pixels is more like 20'


Reply
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago

Like I mentioned before, it comes down to noise and signal degradation which has nothing to do with wire size, and voltage drop due to wire size. They are two different issues. Larger wire helps with voltage drop, but it does nothing for noise or signal degradation. If you are going more than 25 ft look at using null pixels to insure signal quality and use as large a wire as your budget allows for power.
Check the wiki out....
http://www.doityourselfchristmas.com/wiki/index.php?title=Null_Pixels
http://www.doityourselfchristmas.com/wiki/index.php?title=Power_Supplies#Wire_Sizing_in_Pixel_Systems
http://www.doityourselfchristmas.com/wiki/index.php?title=Power_Injection


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

Falconchristmas.com has a new little extender in development that could be your savior too, pretty inexpensive sounding as well.


Reply
Page 2 / 2
Share: