Kulp K16A-B eth0 Is...
 
Notifications
Clear all

Kulp K16A-B eth0 Issues

3 Posts
2 Users
0 Reactions
1,000 Views
Posts: 21
Topic starter
(@davis80)
Eminent Member
Joined: 15 years ago
[#55154]

Hello, having a strange issue here and not sure what is going on. I added a K16 this year to my show. The show is ran by a Pi running FPP v4.5 and an e682 and a F16V3 and those all work just fine still. The problem is the Kulp is refusing to take the static IP address that I have set.

I set it up for 192.168.2.300 with a gateway of 192.168.1.200 but the controller always snags a different IP for eth0.

Attached is a layout of the show network and a screenshot from the Kulp and F16V3 network settings.

Any clues?

Show Network
Kulp K16 Network Settings
F16V3 Network Settings

2 Replies
Posts: 40
(@swanny)
Trusted Member
Joined: 6 years ago

Not sure if it’s a typo but .300 isn’t a valid IP address ( 255 is the max )

Sent from my iPhone using Tapatalk


Reply
Posts: 21
Topic starter
(@davis80)
Eminent Member
Joined: 15 years ago

Well, that was a big time dummy move. Changed to .205 and that fixed it. Thanks a bunch swanny.


Reply
Share: