Intro to pixels hel...
 
Notifications
Clear all

Intro to pixels help

201 Posts
30 Users
0 Reactions
47.7 K Views
dpitts
Posts: 1020
(@dpitts)
Noble Member
Joined: 16 years ago

680 pixels per string is limit with power injection.

Sent from my LGLS990 using Tapatalk


Reply
Posts: 246
Topic starter
(@gump2388)
Reputable Member
Joined: 16 years ago

Wonder why people are stopping at 42?

Sent from my iPhone using Tapatalk


Reply
Posts: 46
(@russellmcfarland)
Eminent Member
Joined: 11 years ago

The Falcon F16V2 can drive 680 pixels per channel. You are going to max out a lot of other things before you max out the controller.


Reply
Posts: 246
Topic starter
(@gump2388)
Reputable Member
Joined: 16 years ago

Good to know. Sound like that controller will almost run everything ill need for a while if im only going to be using 1600 pixels for my tree

Sent from my iPhone using Tapatalk


Reply
dpitts
Posts: 1020
(@dpitts)
Noble Member
Joined: 16 years ago

I think the 42 pixels comes from the day when the e680 could drive only 680 pixels. 680 divided by 16 is about 42

Sent from my LGLS990 using Tapatalk


Reply
Posts: 246
Topic starter
(@gump2388)
Reputable Member
Joined: 16 years ago

Yep nail on the head. I was reading in this forum and they were using e681s!

Sent from my iPhone using Tapatalk


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
gump2388 wrote:Is there a limit to the amount of pixels the falcon can drive as to a mega tree? I see alot if people using 42 pixels per string. This kinda limits the height of the mega tree. I woul at least like to use 50 per strand. Maybe 30 or 32 strands

Sent from my iPhone using Tapatalk

This is entirely a personal preference. I am making a Mega Tree this year using WS2812 30 pixel / m PCB strips with each strip at 5 meters long. This means each of my 16 strings will be 150 pixels (Yes I inject power every 30 pixels). I plan to run them from an F16V2 with 4 strings (legs) on each of 4 outputs of the F16V2 controller (the rest of the outputs are driving other stuff). The strips are actually tied to a set of plastic pixel strips originally used to mount 12mm pixel bullets. These bullet strips provide strain relief for the PCB strip and allow for quick replacement of a leg by simply unhooking the top and bottom of the plastic strip and hooking the (spare) replacement strip into place. Then I fix the strips sitting inside where it is warm.


Reply
Posts: 8
(@aussiedoug)
Active Member
Joined: 12 years ago

The new PixLite that is getting released around June will drive 1020 pixels per output with 16 outputs. Like every other controller these sorts of numbers will need power injection. But if your after more versatility out of the same controller you can use it as 32 outputs instead of 16 & have 510 pixels per output. Support from them has been second to none, any issue I have ever had has usually been resolved in a matter of hours at most. There website has a support ticket program; you have the option of calling them if you really need that little bit extra info to get you up & running. To top this off they provide free shipping within US & Aus.


Reply
Posts: 246
Topic starter
(@gump2388)
Reputable Member
Joined: 16 years ago

I also like the price point of it better too before it goes up

Sent from my iPhone using Tapatalk


Reply
dpitts
Posts: 1020
(@dpitts)
Noble Member
Joined: 16 years ago

We are toying around with the idea of making a controller with similar specs that would be continually sold at that price point. It is doable if we slim down the current version by reducing performance hardware to meet those specs since the cost of the board to manufacture would go down considerably.


Reply
Page 6 / 21
Share: