Intro to pixels hel...
 
Notifications
Clear all

Intro to pixels help

201 Posts
30 Users
0 Reactions
47.7 K Views
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Distance between pixels is controlled by three things: How high a resolution image you are trying to display (pictures tend to need higher resolution than simple text), how close the viewers are going to be to the display and how big your budget is.

The closer to the viewers the smaller the spacing should be. The higher resolution the image needs to be the closer the pixels need to be.

I did a 30 X 32 pixel array with 33.3 mm spacing (30 pixel / m strips). Viewing distance was about 20'. Text was perfect. I put up a picture just for the fun of it. Cartoons looked ok but pictures of people did not look that great.

I also did a tune to matrix using 12 mm bullet pixels in a 25 x 10 grid on 2" centers. Viewing at 15' gave clear legible text (did not try pictures).

Others on this forum have created huge displays for distance viewing with spacing reported as wide as 4".

You will need to experiment to determine what will work in your application.

Good luck and post pictures when you are done.


Reply
Page 21 / 21
Share: