Hi all, I tried searching for this and watched the online videos, but I recently purchased a long range receiver and having some issues with the configuration. I do not use the design tab, but basically I can not understand why the long range receiver only works when I have it set up as a LR stream. What i'm trying to do is just input on the port config for SPI's 1-16, no mega tree, just part of my outline and some props. For reference, I have a HinksPix controller with 16 SPI's that start at #17. On the port configuration screen, I have no issues there putting the number of pixels there and so forth. On the port config for long range expansion ports #1-16 is where it is different. I wanted to put the # of pixels for each SPI port there but when i do that, only port 1 works. So i hit the "+" button and selected Smart 16, and put my info there and it works. (I don't know about the board type and switch position). I only did the first 4 for now, but I want to understand this as I add the rest of my pixels to the long range receiver. So in SPI ports 1 & 2, there is a 50 pixel led strip on each, a 43 pixel on port 3, and 50 pixel on port 4. The rest will have about 50 each on ports 5-12. I don't think i will have enough this year for anything on 13-16. Thanks in advance for any help and still working on my terminology in my 2nd year of this.
Notifications
Clear all
Nov 17, 2021 9:41 am
