How long before this is in DIYC form? You going to do it Angus? 🙂
If you can afford one of these machines Here >
http://www.ddmnovastar.com/wave-solder
I will take up the task 🙂
small foot print comes at a cost , it looks like the controller has a celeron surface mounted .
I was a little curious about the maker, because the voice-over on the video clearly was a machine voice (indicating a non-English-language company). Turns out the business is based in Slovakia, but just over the border from Austria (about a 75-minute drive from Vienna). No U.S. distributor.
\dmc
I have sent out the design for a new Renard Plus Strip Controller and DCSSR board for a quote. We should have them in a month or so. The controller is a 24 channel device that can control 8 seperate LED strips. Sequencing is standard Renard.
Stay tuned.
these controllers will control rgb or digital rgb strip . their sofware is designed to run video on the strips .
here is a better look at the 2 circut boards they use .
http://www.ledstripstudio.com/en/products
angus40 wrote:these controllers will control rgb or digital rgb strip.
Looks to me like it's digital strip / strings only (not dumb DC) ?
Just got a price from the supplier in UK, way too much for anything but the professional user. But interesting that they say 42 LEDs per M and up to 23M per output (92M per distributor) So thats 966 LEDs on one strip and they give the impression that they run from a single PSU at one end.

