Gutter Pixel Spacin...
 
Notifications
Clear all

Gutter Pixel Spacing

5 Posts
5 Users
0 Reactions
2,517 Views
Posts: 138
Topic starter
(@chris2879)
Reputable Member
Joined: 19 years ago
[#26160]

I am thinking about trying to do my gutters this year with pixels. I will need about 75 feet worth. I am planning on using WS2811 w/ C9 covers. I am not sure of how many inches between lights will look good, what do most people do?

Thanks!


4 Replies
dsmjuggalo
Posts: 663
(@dsmjuggalo)
Prominent Member
Joined: 15 years ago

I'm doing 6 inches, I think it's just right.


Reply
Posts: 1792
(@barbotte)
Noble Member
Joined: 17 years ago

well i just look at my regular led and they are 4 an 6 inch apaprt depending of the brand i guess .... my cege are 1 ft a part .... so i think anythink between would be good but what you could do is calculated the lenght divide by the max of pixel before you have to inject power ,,,, on your case if you go with 18 gage wire ( ray will do it at no extra cost ) you could do 12 volt at 100 pixel at 9 inch apart and cover your 75 ft without injecting power ....and if you want to inject power then it does not matter go 5 or 6 inch and that will bring you to a full 175 pixel witch is almost the max for 1 sector on the 682 ...
cheer


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

One thing many people fail to mention when giving advice on this topic is the distance from which they're viewed. That makes a big difference. It also depends what look you're going for. Too tight spacing can have the effect of making a continuous line of color kinda like a neon tube. Especially with LEDs neatly in a line.
My roofline is 100' and 120' from the curb. I use 12" spacing and it looks great. I can still tell they're individual bulbs (looks like Christmas lights and not neon) but they give a nice and bright look. In the past years I've had red and green led bulbs alternating. There was 24" between any two bulbs of the same color. It created a nice separation. Tis year I'm using pixabulbs with 12" of wire between bulbs (which are actually closer to 13" center to center). I'll be able to play a lot more with the colors and spacing (in programming) I'm thinking I'm often going to be skipping every other bulb just to give that more defined "strand of lights" effect.


Reply
Posts: 556
 jpb
(@jpb)
Honorable Member
Joined: 19 years ago
jchuchla wrote:One thing many people fail to mention when giving advice on this topic is the distance from which they're viewed.

I agree. I am going to use around 2.5" spacing (50 pixels over 3 metres). On my house this still gives the look of individual lights but keeps them dense enough to allow smooth chases.
That is what my testing has shown anyway, I won't really know until December 1.

Jon


Reply
Share: