Finally got em fini...
 
Notifications
Clear all

Finally got em finished.

162 Posts
38 Users
0 Reactions
54.4 K Views
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

I have 6, 10, and 14 pixels. That way you have 1m per set and you can get 5 sets from a 5m reel. The spacing on the house varies from about 12" to about 14". It was a matter of distance to cover and division of icicles. I also want to be sure I had the long ones at the top of the peak.

I used the connectors to help with installation and to make it easy to replace any bad icicles. Glad I did that!

I also kept mine short for two more reasons. All my window frames have dumb strips for color and I wanted the Plasma Icicles to stay separated and not run together. As well, that is 3500 channels the way it is, more would have been a nightmare, at least for me.


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

Why thank ya..

A lot came from Ray Wu. 2812B pixel strips ordered with extra sleeve length on each reel. End caps without holes. 5' 4 core cables used to cut the needed lengths.
Locally I got white 1/2" shrink tubing. GE siliconII, wire ties and some patience and some soldering.
Data is driven by 2 each E6804s. The data is received using Pixel Extenders by J1Sys. I used DC-DC converters for power injection off of a single large 24vdc waterproof supply.

BTW, there is a PDF at the end of that dropbox page that shows the power injection and date schemes. The rest was just pretty much working at it until it was finished.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

What's the reason for 4 core cables? I would think you'd need 3 core.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

Because of the power scheme I used. I had to pass the data all the way thru each universe but I injected power every 30 pixels. So I needed a way to isolate one supply's pos from the other. I didn't want any converters folding back because they were being fed voltage from another converter. In hind sight I am not sure I needed to isolate them, but I am not sure I didn't either. I used Blu for common, Grn for data, Brn for power 1 and Blk for power 2. I alternated two brns then two blks and so on. The PDF in the dropbox has the scheme

Dropbox Logo Dropbox File (Private or Invalid)


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

Had a very strong wind the other day, and they held up nicely. Moved around a bit but not too much. Because they are flexible I think they are able to survive quite well.


Reply
komby
Posts: 871
(@komby)
Prominent Member
Joined: 14 years ago

Can't wait to see them in person. They look great!


Reply
Posts: 27
(@jholmes)
Eminent Member
Joined: 14 years ago

These are amazing! I would love to be a Beta Tester for any commercialized version that is in the works. My charity show could really make use of these beauties!


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

Those are very cool. How many hours do you have in them?


Reply
Posts: 2128
(@livermore-dad)
Famed Member
Joined: 16 years ago

Okay when you find someone that will make these for you, I'm in for a house fitting!!!! Would love to see any of the affects you created later in the season. And I'm sure you were very happy with them, after so much time spent creating and building..

Kudo's still one of my favorites from the season!

Tory


Reply
dsmjuggalo
Posts: 663
(@dsmjuggalo)
Prominent Member
Joined: 15 years ago

Todd has his version of these listed in his presale right now. I will be buying them for sure.


Reply
Page 3 / 17
Share: