I have a questions about the Falcon F16V4 and smart receivers. I read that there are two receivers ports that I can daisy chain 6 smart receivers to each ports. My questions is how many pixels are available? If I daisy chain the 6 smart receivers together, does each port 1 on each receiver have 704 pixels available? Or are the 704 pixels split between port 1 on all 6 receivers? I'mtrying to figure out if I need an differential expansion board for some of my smart receivers or can I run them all from the receiver ports. I want to make sure I am understanding the system correctly.
Thanks,
David
A F16V4 with no expansion board should have 1024 pixel to share on the receivers. If you have 6 receivers on port 17 (ie 17A, 17B, 17C, 17D, 17E, 17F) those are all on the same port so they can have a total off 1024 pixels.
Ok thanks for clarifying. That is what I thought. Also good to know that not using
multiple expansion boards does not drop the pixel count per port down to 704 pixels.
Expansion boards can drop it down to the 704 depending on what your configuration is.
There is good info on setups the last few pages of the manual.
Manual? It has a manual?
1pet2_9 wrote:Manual? It has a manual?
Found here https://docs.google.com/document/d/1449zGk1HEiQjcu6e98ebWnFBMFKUiXaFzis9QGAnfsk/edit
Thanks, that's it! The right version and all.
edit: although I see some contradictions. On Kulp's site, it says Falcon V4's won't work with the BBB V2.
https://kulplights.com/product/smart-receiver-v2/
But, the manual says that it does, and that photo of the receiver matches the one on Kulp's site. I'm inclined to believe that it does work with V4, since the rotary dial supports A-F.
Plus the Kulp site says something about BBB boards needing to work in "V2 mode". Since this is a Falcon manual, I don't know if the Kulp32 needs some kind of jumper or software setting, or what its default is. (of course, if I'm working with a K32, then it doesn't matter much whether it works with Falcon V4, since I'm not working with a Falcon V4. I'm just trying to iron out what's the correct information).
