Ethernet Cable Ques...
 
Notifications
Clear all

Ethernet Cable Question

4 Posts
3 Users
0 Reactions
1,229 Views
Posts: 16
Topic starter
(@mikev)
Eminent Member
Joined: 6 years ago
[#53451]

I am currently using a Cat 7 ethernet cable and was just curious if this would cause any problems? I have noticed some strange things that I think might be related to the Cat 7 cable. Should I just stick with Cat 5 / 6?


3 Replies
Posts: 120
(@superdave)
Estimable Member
Joined: 13 years ago

Cat7 shouldn't be a problem. The only thing I can think of, is that some (all?) Cat7 will have extra metal/shielding on the connectors. One would think it would help, but since it isn't expected in any of the designs of our gear, and it is intended to help with a different use case, it could introduce problems? Cat7 also tends to be harder to crimp connectors and otherwise manage... not to mention more expensive! 🙂

What problems are you seeing and attributing to the Cat7?


Reply
Posts: 16
Topic starter
(@mikev)
Eminent Member
Joined: 6 years ago
superdave wrote:Cat7 shouldn't be a problem. The only thing I can think of, is that some (all?) Cat7 will have extra metal/shielding on the connectors. One would think it would help, but since it isn't expected in any of the designs of our gear, and it is intended to help with a different use case, it could introduce problems? Cat7 also tends to be harder to crimp connectors and otherwise manage... not to mention more expensive! 🙂

What problems are you seeing and attributing to the Cat7?

My smart receiver board is showing port 4 is not receiving data. At first, I thought it was the board because both 1 and 4 was not working properly so I replaced the board but port 4 is still showing no data--the data led is not lit and my pixels stay on even without a show running or in test mode.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

If you're working with Catx cable, you need to have one of these in your toolbox. https://www.idealind.com/shop/33-856.html
It's helpful for verifying you crimped it completely and if you got the conductors in the correct order. It can identify straight vs crossover cables. It's also good for checking questionable cables and jacks.

I use a fair amount of RJ45 couplers in my show. I find it to be cheaper and easier to just use the cheap ones and replace them when they go bad rather than get the better weatherproof ones and deal with getting them all sealed. This tester helps me to verify whether it's the cable or coupler that went bad, and makes for easy fixes.


Reply
Share: