I just purchased a 16MB D1 Mini Pro. I suspect the memory size is messing things up in the Flash tool and that it will need a special 16MB build.
Verified. 16MB requires a special build to work. I will add it shortly to the supported platforms list.
MartinMueller2003 wrote:This is a failure to upload to the ESP. It almost looks like you need to manually put the device into programming mode and that did not happen. If you are manually putting the device into programming mode, you will need to do so multiple times.
Can you elaborate on putting device in programming mode?
I am able to load 3.2 without any issues, just plug and upload.
It's only 4.0b4 or the one from your drive that gives me this problem.
Logs from 3.2 and 4b4 attached.
I have Lolin D1 mini v4.0.0.
Also, I can upload WLED with esptool.py, but when using ESP Web Tools, I get timeout. However, ESP Web Tools can install ESPHome with no problem.
MartinMueller2003 wrote:Verified. 16MB requires a special build to work. I will add it shortly to the supported platforms list.
Martin just so you are aware ,
the esptool. in the older realease v4.04.zip works perfectly loading firmware on the wemos D1 mini pro 16m.
Actually, it loads it incorrectly but the jump tables happen to align. The FS needs to be moved in the 16MB version and the image properly aligned. The newer versions of V4 use a custom memory map (which is why I can no longer build on Arduino) to allow for more code space at the expense of the FS. At any rate, I have one coming so I can take a closer look at the issue.


