ESPixelStick Lag
 
Notifications
Clear all

ESPixelStick Lag

54 Posts
19 Users
0 Reactions
14.8 K Views
Posts: 360
(@jlstout)
Reputable Member
Joined: 16 years ago

So did you just block the FPP on the wifi network? I am trying to get all mine working and am running into some problems with lag and range with my Ubiquiti Unifi AP. Or do you turn off the wifi in the fpp settings?


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Hmmmm.... I'm not completely sure how well the Unifi AP handles multicast traffic.... I vaguely recall reading something about it that it wasn't very efficient, but I can't recall exactly....


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago
ScareCrowe wrote:Update on my issue.

I switched to multicast and still had issues. Tried a different ESP and couldn't get it to work at all. Went to flash it again and realized didn't have the tool so re-downloaded and flashed. When it booted up it looked different and then I realized I had been using version 2 instead of 3! grrrr...... What ever my issue was before is gone now. Flashed all my ESPs to v3 and viola! (I blame the blinky flashies for my brain deficiencies)

If you guys are running v2 like me, upgrade! Here is the link, I did the 3rd from the bottom:

https://github.com/forkineye/ESPixelStick/releases

Hopefully this will help you guys too.

This is the third one down. Is this the one you are referring to?

ESP Firmware Travis build

Reply
Posts: 360
(@jlstout)
Reputable Member
Joined: 16 years ago

I got it all working mostly without lag using multicast. I had 2 aps setup and they were conflicting. Took one down and all is well. I think I need to set them up as mesh, instead of both stand alone.


Reply
ScareCrowe
Posts: 107
(@scarecrowe)
Estimable Member
Joined: 11 years ago
11Bravo wrote:This is the third one down. Is this the one you are referring to?

Nope, that is third from the top actually. I did the third from the bottom. It is titled "ESPixelStick v3.0 Firmware" and shows as the 'latest release' in green to the left of it.


Reply
Page 7 / 11
Share: