ESPixelStick Lag
 
Notifications
Clear all

ESPixelStick Lag

54 Posts
19 Users
0 Reactions
14.8 K Views
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago

I finally got the UNSM2 setup to work in my show. I have 26 ESP-01s on 26 models running anywhere between 78 channels to 300 at the most on a model. Each Esp-01 has its' own static IP address. There is lagging at times on the whole show even a E682 that is wired from the Edge-x router running my mega tree is lagging in unison with the other wifi modules and it's not wifi and is set to Unicast.
I read a post where it was said that the universe's need to be packed to reduce the number of universes in the setup. or to something of that effect.
If I reduce the number of universes, yet keep the total number of channels I have setup and not have to rewire any controllers to extend the number of pixels on a short string, is it possible to have more than one ESP-01 have the same static address. But I don't see how that can be done if I want to access one or the others web page.

How could I reduce the number of universes without having to rewire all the strings to make them longer to reduce the number of ESP-01's used to pack the universes to reduce their number.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

the number of ESPs has little to do with the number of universes. It also has nothing to do with the IP address of the ESPixelStick. Well, that's true when you're using multicast, which you should be.

Multicast is not a one to one. It's one to many. One universe can be received by many ESPixelSticks. And you don't send multicast to a specific ESPixelStick, you multicast universes to the network, and the ESPixelStick will grab the universes it's interested in.

Say you have 3 ESPixelSticks. Each with 50 pixels attached. A packed universe would consist of 450 channels on one universe. All 3 ESPixelSticks would use the same universe, but one would use start channel 1, the next would be start channel 151, and the last would be 301.

To directly answer your IP question, no you cannot have multiple nodes on a network with the same IP address. Each device needs it's own IP address. But like I said, that's not how multicast works. It doesn't use the IP address of the ESPixelStick. The IP address of the ESPixelStick is only used for configuration. All of the show data is sent by the player out to the network, and the ESPixelStick reaches out and gets it.

It's just like putting out cookies for santa. You don't reach out and hand cookies to santa. You put them out there. And they get eaten. Maybe by santa, maybe by daddy, maybe each reindeer eats two of the cookies. But anyone interested in cookies knows where to find them, and anyone who knows where to find them can eat them.


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago

OK, so I did some smaller scale testing with my home router/ap, and now I need to get a dedicated AP because it doesn't connect well enough to some ESP's in the yard.

I want to avoid the issues of this thread if possible...

What would you recommend? The Upiquiti Nano Station M2 seems fairly popular, but is pretty directional for some people. The TP-Link CPE210 is cheap and looks to be more omnidirectional (for 2.4GHz only).


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
Zeph wrote:
What would you recommend? The Upiquiti Nano Station M2 seems fairly popular, but is pretty directional for some people. The TP-Link CPE210 is cheap and looks to be more omnidirectional (for 2.4GHz only).

Why would you think you want omnidirectional? Isn't your whole show in front of your house? Are you planning on putting the AP right in the middle of the yard? Put one nanostation in one corner of your yard near the house and aim it diagonally across the yard. It's plenty wide enough to cover the 90 degree spread in the first 150' or so. It's more important to have the performance and features of a pro grade AP than it is to have omnidirectional coverage.

Ever wonder why most outdoor APs are directional?


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago
jchuchla wrote:the number of ESPs has little to do with the number of universes. It also has nothing to do with the IP address of the ESPixelStick. Well, that's true when you're using multicast, which you should be.

Multicast is not a one to one. It's one to many. One universe can be received by many ESPixelSticks. And you don't send multicast to a specific ESPixelStick, you multicast universes to the network, and the ESPixelStick will grab the universes it's interested in.

Say you have 3 ESPixelSticks. Each with 50 pixels attached. A packed universe would consist of 450 channels on one universe. All 3 ESPixelSticks would use the same universe, but one would use start channel 1, the next would be start channel 151, and the last would be 301.

To directly answer your IP question, no you cannot have multiple nodes on a network with the same IP address. Each device needs it's own IP address. But like I said, that's not how multicast works. It doesn't use the IP address of the ESPixelStick. The IP address of the ESPixelStick is only used for configuration. All of the show data is sent by the player out to the network, and the ESPixelStick reaches out and gets it.

It's just like putting out cookies for santa. You don't reach out and hand cookies to santa. You put them out there. And they get eaten. Maybe by santa, maybe by daddy, maybe each reindeer eats two of the cookies. But anyone interested in cookies knows where to find them, and anyone who knows where to find them can eat them.

Again my thinking was screwed up. I guess I had it backwards, I was trying to reduce the number if universes by reducing the number of ESP addresses.

I started the ESP universes after the E682 which ended at universe 6 and reconfigured the setup to put as many ESP addresses to reach or stay below the maximum number of channels in a universe without disturbing my layout. This reduced the universe count from 32 to 15 I hope that works. A little later I ran sequence and only the mega ran by the E682 worked. I forgot to change the universe in the ESP-01's. Now it is working. Keeping my fingers crossed, I don't see any lag.

setup reducing universes
setup 2nd page

Reply
Page 10 / 11
Share: