Gnatman wrote:how can I find out? I have the ESP-01S. These are on the reneard wifi sticks FYI
Build and load a sketch called "CheckFlashConfig". It will tell you how much memory you have on your card and whether you have the Arduino IDE properly configured or not.
On my PC it is located here:
C:\Users\mmueller\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.3.0\libraries\esp8266\examples\CheckFlashConfig
Gnatman wrote:how can I find out? I have the ESP-01S. These are on the reneard wifi sticks FYI
If you got those with your Renard WiFi then they are 1M
Maybe your USB to UART dongle isn't up to the task. I use only CP2102
Others say they use others, but I've tried about 6 type, ant the below is the only one that works for me.
example (match exactly - other copycats don't work)
USA:
http://digwdf.com/store/product.php?id_product=178
Gnatman wrote:how can I find out? I have the ESP-01S. These are on the reneard wifi sticks FYI
Oops....you are saying ESP-01S. I think the S is a different model. Could be the issue. Anybody know the difference between the ESP01 and ESP01s
mrGrumpy wrote:Oops....you are saying ESP-01S. I think the S is a different model. Could be the issue. Anybody know the difference between the ESP01 and ESP01s
ESP-01 http://www.electrodragon.com/product/esp8266-wi07c-wifi-module/
ESP-01s http://www.electrodragon.com/product/esp-01-esp8266-wifi-module/
MartinMueller2003 wrote:Build and load a sketch called "CheckFlashConfig". It will tell you how much memory you have on your card and whether you have the Arduino IDE properly configured or not.On my PC it is located here:
C:\Users\mmueller\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.3.0\libraries\esp8266\examples\CheckFlashConfig
so that checkflash should be on mine too? or was that something you made? I don't know how to code at all but could copy paste easily
All my ESP-01 have Al-Cloud Inside marked on them. ESP-01s do not ????
mrGrumpy wrote:If you got those with your Renard WiFi then they are 1MMaybe your USB to UART dongle isn't up to the task. I use only CP2102
Others say they use others, but I've tried about 6 type, ant the below is the only one that works for me.example (match exactly - other copycats don't work)
I purchased this one from amazon - HiLetgo CP2102 USB 2.0 to TTL Module Serial Converter With Free cable
https://www.amazon.com/gp/product/B00LODGRV8/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
if it was the usb dongle, then I'd assume it wouldnt work on the arduino either but it does work.
mrGrumpy wrote:All my ESP-01 have Al-Cloud Inside marked on them. ESP-01s do not ????
One does, one does not. the one that does, is a replacement I purchased after a user error.. 🙁
Hi, not real difference. What colour is your PCB?
Black circuit board = larger flash.
Blue circuit board = smaller flash.
PCB = ESP module? both are black in color

