ESPixelStick Flash ...
 
Notifications
Clear all

ESPixelStick Flash Tool

223 Posts
49 Users
0 Reactions
100.3 K Views
Posts: 209
(@marx1)
Reputable Member
Joined: 18 years ago

I had problems programming my ESP-01's turns out the FTDI TTL adapter I had was actually a fake, even though it had a FTDI chip. I got this CP2102 adapter from amazon:

https://www.amazon.com/gp/product/B014PBYER4/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

My symptoms where it would flash the first code, but not the spiffs.


Reply
Posts: 4
(@gmarsh)
New Member
Joined: 9 years ago

I am at a loss, I don't know what to do.... Highly disappointed.


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago
ukewarrior wrote:For what its worth, I have bought hundreds of these off aliexpress.
I always pick a vendor that has lots and lots of prior sales with a very high rating score.
As a result, none have come back at me.
Not sure if that's good luck or finding a vendor that does care about their feedbacks and ratings.

The rub with these is that they are a 100% Chinese only device so we are all subject to the wild west nature of chinese consumer electronics.

For example, consider how many bullet pixels are being shipped out of China and still folks sometimes encounter quality problems.
It's best to try and find a vendor that actually cares about their reputation and future business instead of someone that picked some up at one of the Chinese bazaars and then sells them on ebay only to disappear later.

btw... 11Bravo... I have some of these I can send you if you want to try and salvage your show.

I sent you a PM


Reply
Posts: 7
(@mdnooyer)
Active Member
Joined: 9 years ago

Hi,
I thought I had found it, but too bad.
By adjusting the file manually, the esp's worked.
But now I'm testing and I've had the power on and off a few times.
They fall out 1 by 1, only the esp's where "al-cloud inside" is on stil working.
Had 10 and 20 ordered on ali express these all give problems.
The esp's that I order in the Netherlands (a bit more expensive) all work.
except one, but that was because he was under water for a few days.

greetz, Mark


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

This thread seems to have steered off into support for multiple hardware issues due to either bad modules or compatibility issues with the way the binaries are delivered. The intention of this thread was for people who may want to use the flash tool with their own binaries, creating EFU's, etc.. Lately, it seems that many people are having issues related to specific hardware implementations or modules which is unrelated to the flash tool itself. The binaries I include with the flash tool in my pre-compiled releases are targeted at the ESPixelStick V1 and V2 hardware. If you're using a board from another vendor, I recommend you contact them for which firmware you should be using or see if they provide their own as some boards developed by others use different outputs and are incompatible with the binaries that I deliver. I would also check the threads for those specific boards as solutions may have already been discussed there. If you're developing your own, I recommend you compile from source. I've updated the initial post with the following:
thanks,
-shelby

The latest ESPixelStick Flash Tool is always included in the latest ESPixelStick firmware release. The binaries delivered with it are compiled specifically for the ESPixelStick hardware and tested with the ESP modules included with it. If you are having flashing issues related to your specific board, please keep those to their respective threads or a new thread and it will help keep these things sorted out. The intention of this thread was about the flash tool itself and to provide assistance for others who may want to use it with their own binaries. Thanks!

Reply
Page 40 / 45
Share: