ESPixelStick Flash ...
 
Notifications
Clear all

ESPixelStick Flash Tool

223 Posts
49 Users
0 Reactions
100.3 K Views
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago

The decision I made to use ESP8266 this season has caused me not to have a show. The pixel stick is a good thing but the ESP01's are unreliable. Can't even rely on them to work after a successful flash then plugging in to the pixelstick and then applying power, they will most of the time go into malfunction. I've reprogrammed most of them several times to have them fail when putting into service. Sometimes they will survive after applying power and sometime not. But they quit functioning later after being in service. I bought 10 ESP-01S and three ESP-01's with the icloud inside label on them, Everyone one of the ESP-01S have failed numerous times, and one of the ESP-01's with the red LED has failed twice.
It has been a frustrating season, I'm not as savy as most of you whom can go in and modify the config.json file.
Merry Christmas to all.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

I may have something to help. Pm me if interested.

11Bravo wrote:The decision I made to use ESP8266 this season has caused me not to have a show. The pixel stick is a good thing but the ESP01's are unreliable. Can't even rely on them to work after a successful flash then plugging in to the pixelstick and then applying power, they will most of the time go into malfunction. I've reprogrammed most of them several times to have them fail when putting into service. Sometimes they will survive after applying power and sometime not. But they quit functioning later after being in service. I bought 10 ESP-01S and three ESP-01's with the icloud inside label on them, Everyone one of the ESP-01S have failed numerous times, and one of the ESP-01's with the red LED has failed twice.
It has been a frustrating season, I'm not as savy as most of you whom can go in and modify the config.json file.
Merry Christmas to all.

Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

Which version of the hardware are you using? I've yet to have a single report of issues like that with any of the ESP-01 modules I include with my kits. Everytime is either a questionable module or a someone else's kit running the ESPixelStick firmware.

Sent from my Moto G (5) Plus using Tapatalk


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago

I believe not getting these things to run is mainly from my ignorance of setting parameters and quality of the ESP-01s that I bought.
I'm using B Porters Pixel POP design modified to a Tiny PCB by Uke Warrior and a Flashamater and the CP2102 USB-TTL Board V3.0 from DirkNerkle.
I bought some ESP-O1S's from ebay, That is most probably my biggest mistake.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

For what its worth, I have bought hundreds of these off aliexpress.
I always pick a vendor that has lots and lots of prior sales with a very high rating score.
As a result, none have come back at me.
Not sure if that's good luck or finding a vendor that does care about their feedbacks and ratings.

The rub with these is that they are a 100% Chinese only device so we are all subject to the wild west nature of chinese consumer electronics.

For example, consider how many bullet pixels are being shipped out of China and still folks sometimes encounter quality problems.
It's best to try and find a vendor that actually cares about their reputation and future business instead of someone that picked some up at one of the Chinese bazaars and then sells them on ebay only to disappear later.

btw... 11Bravo... I have some of these I can send you if you want to try and salvage your show.


Reply
Page 39 / 45
Share: