It depends. Is it one of the supported platforms? Then yes. But you did not tell us what you purchased so how can we know?
you're right, Martin. They are identical to the ones I have ESPWroom32, I received them this morning and everything worked, directly from the .jar file.
while for the non-connection I was wrong for sure. I had set the number of channels in Vixen to identify the most suitable universes for me (also reporting on the ESP), instead I had to modify with a greater number of channels by decreasing the universes.
Increasing the channels to the highest number per universe worked and holds the connection to the router well:
in this case I was doing some tests for my first mega tree, 62 pixels for 16 strings and I had set 186 channels for 16 universes (I thought I would keep one universe for each string) but it was not good ... while then I did 496 channels for 6 universes and everything was fine.
I still have a lot to learn ...
With E1.31 as inefficient as it is, not filling a universe is pretty tough on a network. The ESPixelStick is tuned to support universes that are near to full. DDP is much more efficient then E1.31 and gets rid of universes entirely.
