ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
Posts: 31
(@qawsed55)
Eminent Member
Joined: 11 years ago
MartinMueller2003 wrote: show players so that they only send data appropriate for the event.

First of all - FPP may stay far away from place, where leds are. But ESP will be near. In any case - last controller, that send data to leds will be not so far, as other show devices.

Second thing: If "last controller" would be able to process "Custom Event" himself - we will be free to use any software, that may not be able to process "Custom Event". We dont't need to think how put wires from "Custom Event" controller and FPP.
In many cases I think that it is more clever to process not large amount of "Custom Events" on last controller's side. In case of situation when we need to light some leds when moving happens - it is 100% more clever, then trying to understand how we need to send data to FPP (wires, length limit, brandwight, etc).

I wrote this not try to say, that your word have no cense. No, I just worry, that you may not understand that I want to say.

MartinMueller2003 wrote:You could easily modify the ESP to map two universes on top of each other and if a special universe is seen then ignore the other universe for some period of time or as you are proposing, create a mask with the data from the special universe.

It is interesting. I'll think about this.

MartinMueller2003 wrote:ESP-01 does not have many physical inputs

I know that. I'll think how I can send to ESP leds numbers, that need to be lighted.

Thanks a lot!


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago
MartinMueller2003 wrote:
You could easily modify the ESP to map two universes on top of each other and if a special universe is seen then ignore the other universe for some period of time or as you are proposing, create a mask with the data from the special universe. More than that can get difficult using the ESP-01. ESP-01 does not have a lot of spare memory so while you can ad things, they have to be very simple.

Hi, to follow Martins comment the ESP filters the universe packets it receives and sends to the lights. I wouldn’t have thought it would be a difficult modification to switch between two or more sets of universes dependant on an external input. i.e. No motion detected display universes 1-> 4, if motion is detected display universes 5 -> 8. This means that you are now sending eight universes to your ESP but everything comes at a cost.


Reply
Posts: 31
(@qawsed55)
Eminent Member
Joined: 11 years ago

I think there may be this hack, that I hope would be easy for ESP processor:
We know, that 1 universe - it is 510 channels. Subj able to drive 4 universes.
If we take firs three universes for RGB, that would be 510 RGB channels. And we have 1 else universe with 510 not RGB channels.
I will make some controller, that would send detected moving data to 4-th universe. First channel of 4-th universe would drive 1 RGB channel in 1-st universe, and so on.
Moving data would be send in binary mode: just 1 or 0.
Then, PixelStick need just multiply RGB data of each channel to moving data. And send result to output to LED strip as usual.
If there no moving, moving data channel would have zero, and there no light. If moving detested - we will see light.
I think multiplying is not very hard work for ESP performance ))
Sorry for pore English.
I will work on this idea )


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The problem is that there is not a lot of ram in the ESP. For this reason, data (for one universe) is received, converted, sent to the pixels and overwritten by the next received packet. The is very little chance to hold data for processing "later".


Reply
Posts: 49
(@jackal24)
Trusted Member
Joined: 8 years ago

Just built a few pixelpop mini's and I'm having issues with them. I am trying to test them with a 12V 50 pixel string. When I turn on the power supply, the first 6 bulbs light up white with the rest of the string off. No matter what I do in the 'testing' page on the ESPixel IP, nothing changes. The weird thing though, is when I unplug the power supply and the power fades to the PixelPop and the string, the string will momentarily light up with whatever effect I chose in the 'testing' menu before it loses power completely.

I am running firmware 3.0. I have tried multiple power supplies, multiple PixelPop boards, multiple ESP-01 modules (bought from adicore, so no bad memory), and multiple strings from different manufacturers. I have also tried injecting power into the beginning of the string with no change. My power supply is outputting 12.1 volts.

This is planning on being my first display, but this is driving me crazy. Any ideas?


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
jackal24 wrote:Just built a few pixelpop mini's and I'm having issues with them. I am trying to test them with a 12V 50 pixel string. When I turn on the power supply, the first 6 bulbs light up white with the rest of the string off. No matter what I do in the 'testing' page on the ESPixel IP, nothing changes. The weird thing though, is when I unplug the power supply and the power fades to the PixelPop and the string, the string will momentarily light up with whatever effect I chose in the 'testing' menu before it loses power completely.

I am running firmware 3.0. I have tried multiple power supplies, multiple PixelPop boards, multiple ESP-01 modules (bought from adicore, so no bad memory), and multiple strings from different manufacturers. I have also tried injecting power into the beginning of the string with no change. My power supply is outputting 12.1 volts.

This is planning on being my first display, but this is driving me crazy. Any ideas?

First off, start a new thread. New problem, new thread. But it sounds like you have a voltage problem.


Reply
Posts: 49
(@jackal24)
Trusted Member
Joined: 8 years ago
jchuchla wrote:First off, start a new thread. New problem, new thread. But it sounds like you have a voltage problem.

Just started a new thread. Would you mind replying in that thread what you mean by voltage problem? Too high/ too low? For the string or for the pixelpop?


Reply
tecnageek
Posts: 220
(@tecnageek)
Reputable Member
Joined: 10 years ago

ESPixelStick 6 Pin Right Angle Sockets. does anyone have a link to where I can purchase a few of these. I want to use them on various props for various shows, and just switch in and out the pixelstick.


Reply
Posts: 11
(@rjhodgefamily)
Active Member
Joined: 9 years ago

Is there a version 3 of the board in development yet? I would love to see the board lengthened a little to do 2 things. First would be to put the Pin designations on top (+, -, Data, Clock). And second would me to accommodate a second mounting hole. Having just built 20 custom enclosures, I found my self constantly flipping the board over to reference the screen print, and I kept breaking my hex nylon spacers until I figured out the right placement for strain relief. I think a second hole would help eliminate that.

I know most people probably use the 1" thin wall pvc but for our purpose we used MTM AC30 ammo cans which required mounting the boards. Just thowing ideas out there not sure if a version 3 is even on the radar yet.

Thanks,
Richard


Reply
Posts: 5
(@baringia)
Active Member
Joined: 9 years ago

But is it not possible to order the Espixelstick cards from OSH park anymore? Thank you.


Reply
Page 94 / 95
Share: