ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
Posts: 375
(@gocats7)
Honorable Member
Joined: 18 years ago

I thought I read in the group buy main post it supported 4 universes? Is that old information and the # has been refined through further testing?

sporadic wrote:A) It mounts at a right angle so I'm hoping it'll clear. I'm still waiting on the connectors I ordered to show up and will do a fitment test when I get them. There a little odd at 3.96 pitch, but keeps it open to use the wafers or euros.

B) The firmware currently only supports a single universe, but I'm pretty confident it could support two if required. I've tested 4 universe before, but its a little sketchy and you get some resets. I'll try dragging some more lights out this week and see what I can do.

C) I don't have any GECE stuff in the firmware or lights to test with. It's just WS2811 for now, but I could look at adding it if someone wanted to send me a light or two.


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
gocats7 wrote:I thought I read in the group buy main post it supported 4 universes? Is that old information and the # has been refined through further testing?

Correct, that's old information. The current firmware supports 4 universes without issue. My test matrix is actually a little over that at 720 pixels:


Reply
TheLost
Posts: 189
(@thelost)
Estimable Member
Joined: 10 years ago
sporadic wrote:I plan on starting one soon, probably this week.

I was going to do an OSHPark order... but if your doing a group buy i'll wait 🙂


Reply
Posts: 64
(@oceanwanderlust)
Trusted Member
Joined: 13 years ago

How hard would it be to modify the code to support just one E1.31 channel such as a Sonoff? I really like the idea of a $6 WiFi, completely self-contained, ON/OFF string controller.

EDIT: IMO, this should only take a few lines of well placed code...


Reply
Posts: 19
(@cengiz)
Active Member
Joined: 11 years ago

Hi friends,

The Pixel driver works great,

If I wanted to use it as DMX 512 ...

Is there a way to use Espixel Sitick 1 universe DMX 512?

Also,

Latest update 2.1? Any new updates?

Thanks


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
oceanwanderlust wrote:How hard would it be to modify the code to support just one E1.31 channel such as a Sonoff? I really like the idea of a $6 WiFi, completely self-contained, ON/OFF string controller.

EDIT: IMO, this should only take a few lines of well placed code...

Should be fairly easy, I don't have one to play with.

cengiz wrote:Hi friends,

The Pixel driver works great,

If I wanted to use it as DMX 512 ...

Is there a way to use Espixel Sitick 1 universe DMX 512?

Also,

Latest update 2.1? Any new updates?

Thanks

Thanks! Yes, you just need to feed the output through a RS485 transceiver. I've written up a quick howto on it here - http://diychristmas.org/vb1/showthread.php?7274-ESPixelStick-RS485-DMX-Hack . As for the firmware, I haven't had much time to work on it since Halloween started. Things have settled down so there will be some updates coming soon.


Reply
ThinkAgainAgain
Posts: 230
(@thinkagainagain)
Reputable Member
Joined: 12 years ago

Looking forward to the next group buy - These really saved my show this past season. I ran about 20+ ESPixelsticks (5) version 1.0 and about (16) V2.0 - I think i burnt up 2 or 3 and one had a voltage drop insufficient to run the pixels.

I had an e682 give out the day I went to set up- so I started plugging these in and everything worked great. I had them on my roof, my mega star, all over my house and yard, pretty much everything except my mega tree. Thanks for developing these! 2,000 plus pixels on the wireless props.

So - I was curious if people are running a bunch - when are they seeing problems with lagging or overloading a wireless network? I tried to add a Ubiquiti nano station outside, but I ended up being so confused/frustrated by it. -- I ended up getting a more powerful AC router in my living room (i live in a concrete block house) and my yard is about an acre. My roof on my house and my in-law suite is about a 150 feet long..... Again everything worked pretty flawlessly.

My question is - Can I add MORE!!! What in your experience is the breaking point of a network? I know I want to at least get extras - because I ran out.

How hard did y'all push your ESPixelSticks this year???

Thanks,
Sean


Reply
TheLost
Posts: 189
(@thelost)
Estimable Member
Joined: 10 years ago

Any news on the group buy? I'd like to use them for an event in the summer... If not i'll have to source the parts myself (and I'm lazy.. would rather to a group buy 😀 )


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
ThinkAgainAgain wrote:Looking forward to the next group buy - These really saved my show this past season. I ran about 20+ ESPixelsticks (5) version 1.0 and about (16) V2.0 - I think i burnt up 2 or 3 and one had a voltage drop insufficient to run the pixels.

I had an e682 give out the day I went to set up- so I started plugging these in and everything worked great. I had them on my roof, my mega star, all over my house and yard, pretty much everything except my mega tree. Thanks for developing these! 2,000 plus pixels on the wireless props.

So - I was curious if people are running a bunch - when are they seeing problems with lagging or overloading a wireless network? I tried to add a Ubiquiti nano station outside, but I ended up being so confused/frustrated by it. -- I ended up getting a more powerful AC router in my living room (i live in a concrete block house) and my yard is about an acre. My roof on my house and my in-law suite is about a 150 feet long..... Again everything worked pretty flawlessly.

My question is - Can I add MORE!!! What in your experience is the breaking point of a network? I know I want to at least get extras - because I ran out.

How hard did y'all push your ESPixelSticks this year???

Thanks,
Sean

I ran 16 for my show off a Nanostation LocoM2. I'd so 20 is pushing it, but glad to hear you had good results! It really depends on how many clients your AP can handle without bogging down and your local RF environment.

TheLost wrote:Any news on the group buy? I'd like to use them for an event in the summer... If not i'll have to source the parts myself (and I'm lazy.. would rather to a group buy 😀 )

I had originally planned to have it running by this week, but still have to get some numbers from the board house. Plan on one starting by the end of the month and running for a couple of weeks.
thanks,
-shelby


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

Glad to hear about the GB,looking forward to it.

I'm planning on running 10-12 off my Loco M2 this year.


Reply
Page 39 / 95
Share: