I have built my first ESPixlePop and are trying to program it. It keeps failing. Following is what shows up in the status window.
-= Building SPIFFS Image =-
bin/win/mkspiffs.exe -c spiffs/ -p 256 -b 4096 -s 131072 firmware/spiffs.bin
/config.json
/www/esps.css.gz
/www/esps.js.gz
/www/index.html.gz
-= Programming ESP8266 =-
bin/win/esptool.exe -cd nodemcu -cb 115200 -cp COM3 -ca 0x000000 -cf firmware/pixel-3.1-1m_128k.bin -ca 0xDB000 -cf firmware/spiffs.bin
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
PROGRAMMING FAILED
I have included a screen shot of the programming window.
All help will be appreciated.
If I remember correctly, that uses an ESP01. You need to manually put the esp01 into programming mode. The utility assumes the device supports more pins than the esp01 has.
Can anyone tell me how that is done?
search the web for "how to program the esp01"

