E68x vs j1sys contr...
 
Notifications
Clear all

E68x vs j1sys controllers

18 Posts
13 Users
0 Reactions
6,030 Views
rokkett
Posts: 441
(@rokkett)
Reputable Member
Joined: 17 years ago

The SanDevices controllers are parallax propeller based, so you would need a prop plug to program new firmware. But that is only if you somehow lost the programming, any newer e68x will come with firmware that can self update over the network. It is less than $20 for a prop plug, or you might be able to find someone local to you that has a prop plug - if needed... 🙂


Reply
DonFL
Posts: 97
(@donfl)
Estimable Member
Joined: 17 years ago

I am a big fan of Jim St John and his Sandevices products, have 3 of the E681s, now upgraded with the DIYLedExpress modules. Good product, excellent tech support/responsiveness, strong focus on the DIYer. Definitely an easy product to get very comfortable with very quickly as you dive into pixels.


Reply
Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago

I don't think Ed (j1sys) has given up on DIYC, just that he hangs around much more on AusChristmasLighting.com because those guys seem to prefer his stuff vs. the E68x line.

Ed's stuff is PIC based, and he prefers to sell stuff already made, rather than kits.

Jim of SANdevices.com sells both assembled and kits, so that's why there seems to be more interest here...and the E68x line does run the Prop chip, rather than PIC.

Both are great devices, and each has it's place. Back early on, I bought one of Ed's ECG-DR8's, which came partially in kit form. The DR8 is an 8 output E1.31 bridge and will put out either DMX or Renard protocol. He mostly sells the DR4 these days, which is completely assembled and has up to 4 outputs. The DR8 has been rock solid for at least 3 years now.

Ed's PIXAD line is roughly equivalent to the E68x line, but as has already been mentioned, the E68x supports more pixel types.

I have 4 E681's, and an E682 kit is coming sometime soon for next year. Since I have several display items separated by a good distance, having one on each is a great way to go. I have yet to max out an E681 beyond it's original capacity (680 pixels), but I don't currently have a pixel megatree either.

If you're looking for a pixel controller that you can assemble, your only choice between these two is the E68x. If you want the most dense pixel driving capacity, and don't care about assembling it, then the j1sys stuff tends to win out.

Choices, choices...


Reply
cenote
Posts: 350
(@cenote)
Reputable Member
Joined: 19 years ago

Nicely put 🙂


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Is there any "vs" when it comes to C L A P ?

buy 2 or 3 of each to get yourself started .

1 is to many and 2 dozen won't be enough .

Cheers
Richard


Reply
Page 3 / 4
Share: