E68x vs j1sys contr...
 
Notifications
Clear all

E68x vs j1sys controllers

18 Posts
13 Users
0 Reactions
6,029 Views
jaywalk101
Posts: 761
(@jaywalk101)
Prominent Member
Joined: 15 years ago

I only have experience with the E68X line, and I used three of them this year with my display without a hiccup.... Jim from sandevices.com is awesome when it comes to support and upgrades as well!


Reply
Posts: 214
(@gary-martin)
Estimable Member
Joined: 18 years ago

I looked at both closely and last year, it was pretty hard to get anything from J1Sys. That situation has changed from what I've heard. They both work, but they're best at different things. IMHO, the E68x is better used in a tight cluster of pixels, a Megatree or panel display. It's ideal for 16 strands of 42 pixels per strand to fill up four universes. That way you don't have to inject power all over the place, just at the controller. The J1Sys can support more universes, but then you'd be running power injection drops all over your strings to keep your whites white. 😉 The J1Sys has a GUI setup page for those that can't deal with text but then the SanDevices E68x handles more protocols. Someone I know here in town was trying to setup 1804 based pixels with a J1Sys and was having issues with how fast they could get changes to take effect in their sequencing. The SanDevices unit supports two different 1804 types for fast or slow based controllers and is actually easier to setup for that product. The SanDevices can also use one of it's clusters to drive a DMX512 chain directly. It's a handy thing for eliminating extra wiring, just to be able to drop another DMX chain where the pixel controller is.

It's personal preference, there is no perfect choice.


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago
Gary Martin wrote:I looked at both closely and last year, it was pretty hard to get anything from J1Sys. That situation has changed from what I've heard. They both work, but they're best at different things. IMHO, the E68x is better used in a tight cluster of pixels, a Megatree or panel display. It's ideal for 16 strands of 42 pixels per strand to fill up four universes. That way you don't have to inject power all over the place, just at the controller. The J1Sys can support more universes, but then you'd be running power injection drops all over your strings to keep your whites white. 😉 The J1Sys has a GUI setup page for those that can't deal with text but then the SanDevices E68x handles more protocols. Someone I know here in town was trying to setup 1804 based pixels with a J1Sys and was having issues with how fast they could get changes to take effect in their sequencing. The SanDevices unit supports two different 1804 types for fast or slow based controllers and is actually easier to setup for that product. The SanDevices can also use one of it's clusters to drive a DMX512 chain directly. It's a handy thing for eliminating extra wiring, just to be able to drop another DMX chain where the pixel controller is.

It's personal preference, there is no perfect choice.

The E682 supports up to 1020 total pixels. The numbers you are refrencing are for the E680 and E681. Also, there is an adapter PCB available that will allow thet E680 and E681 to drive 1020 pixels.

For both pixel and user support it's SanDevices hands down. It seems J1sys has pretty much given up on DIYC.


Reply
Posts: 425
Topic starter
(@mkess)
Honorable Member
Joined: 19 years ago

On the e682 kits, do I need to be able to flash pics or anything like that? Or do I just solder and go


Reply
pmcpa
Posts: 1390
(@pmcpa)
Noble Member
Joined: 17 years ago

Only if you buy the PIC's from mouser. If you get a kit from Jim or from a group buy they are normally pre-flashed


Reply
Page 2 / 4
Share: