Notifications
Clear all

E682 Zig Zag

10 Posts
3 Users
0 Reactions
5,820 Views
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

When you have it set run the test in the web controller setup. Run a chase. The chase will start bottom of first 50 then moves to bottom of second 50. It won't go to top of first string then down the second string. All strings work from bottom up. So pixel 100 actually becomes pixel 1 of second string. Make sense?

Sent from my SM-T710 using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Btw, if you only have 100 pixels per string then you only need to set zigzag and nothing entered in "Then every". If you had 150 pixel strings then you would zigzag every 50 and 50 "then every".

Sent from my SM-T710 using Tapatalk


Reply
Posts: 357
Guest
Topic starter
(@jerry72)
Reputable Member
Joined: 13 years ago
angus40 wrote:I can't help but recall this thread you post

http://doityourselfchristmas.com/forums/showthread.php?45871-Do-E682-test-modes-respect-quot-zig-zag-quot&highlight=e682+zigzag

Did you ever have this working ?

That wasnt me. Different Jerry. This is the first time i have needed this. First year with a matrix.


Reply
Posts: 357
Guest
Topic starter
(@jerry72)
Reputable Member
Joined: 13 years ago
pmiller wrote:Btw, if you only have 100 pixels per string then you only need to set zigzag and nothing entered in "Then every". If you had 150 pixel strings then you would zigzag every 50 and 50 "then every".

Sent from my SM-T710 using Tapatalk

Oh, ok. I will change that then. I will have the matrix built tomorow so and will run a sequence to make sure it is all working.


Reply
Page 2 / 2
Share: