E682 dimming lights
 
Notifications
Clear all

E682 dimming lights

8 Posts
4 Users
0 Reactions
5,755 Views
Posts: 357
Guest
Topic starter
(@jerry72)
Reputable Member
Joined: 13 years ago
[#46326]

Ok, so i got one issue figured out, now i have another. When i use the test mode on the configuration page, the lights come on, but they are only maybe 50% bright. When i change colors, for a brief second, they light up to 100%. I have the illumination set to 100% on the output page for each output. It is not the new lights i got, this happens on every strand i have. On the main paige, what should the ns be set to? Not sure it has anything to do with it thought.


7 Replies
Posts: 357
Guest
Topic starter
(@jerry72)
Reputable Member
Joined: 13 years ago

A side note, i measure the volts coming out of the other end at12 volts. So no power loss.


Reply
Posts: 70
(@jchancel)
Trusted Member
Joined: 11 years ago

You sure you are using the correct test mode? The e682 has a chase test mode where the lights are dim except a single chase pixel.

Sent from my ONEPLUS A5000 using Tapatalk


Reply
Posts: 357
Guest
Topic starter
(@jerry72)
Reputable Member
Joined: 13 years ago
jchancel wrote:You sure you are using the correct test mode? The e682 has a chase test mode where the lights are dim except a single chase pixel.

Sent from my ONEPLUS A5000 using Tapatalk

I found out that it is the Power Limiter. But i am unsure as to what this should be set to. trying to find some information on it. Not sure if it only effects testing or does it need to be set for sequences as well. I like it, keeps the power consumption down, just need to figure out how to use it properly.


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
jerry72 wrote:I found out that it is the Power Limiter. But i am unsure as to what this should be set to. trying to find some information on it. Not sure if it only effects testing or does it need to be set for sequences as well. I like it, keeps the power consumption down, just need to figure out how to use it properly.

I have my power limiter set to 9999

Sent from my SM-T710 using Tapatalk


Reply
Page 1 / 2
Share: