E682 - Troubleshoot...
 
Notifications
Clear all

E682 - Troubleshooting Help -

4 Posts
2 Users
0 Reactions
2,067 Views
ThinkAgainAgain
Posts: 230
Topic starter
(@thinkagainagain)
Reputable Member
Joined: 12 years ago
[#42007]

Hi ya'll

I'm building a new E682 - On the final Soldering stage test - I'm only getting one yellow light - Not the 3.3v light.

Checking voltages - on regulator top pin(input) I'm only getting 4.93V (Should be 5.0v) and output bottom pin - I'm only getting 3.23V (should be 3.3v).

I have adjusted my input voltage to see if that made a difference (it didn't ). And I have tested my other Controllers (E682's) and have 5.0 and 3.3 respectively.

I'm not seeing any bad solder joints, I'll go back and double/triple check.

Any help/tips would be greatly appreciated

Thanks,
~Sean


3 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Double check for polarity orientation of all discrete components .


Reply
ThinkAgainAgain
Posts: 230
Topic starter
(@thinkagainagain)
Reputable Member
Joined: 12 years ago

OK - I got it figured out! Missed installing a Resistor network! RNB

Thanks Angus!


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

:thup: Glad you caught it !

Gotta luv Mr. StJohns for affording us the luxury of assembling these boards and pulling our hair out when we miss something lol .


Reply
Share: