e682 numbers help
 
Notifications
Clear all

e682 numbers help

23 Posts
7 Users
0 Reactions
5,368 Views
Posts: 13
Topic starter
(@jmaverick101)
Eminent Member
Joined: 10 years ago
[#43944]

So I finally got my San 682 up and running. Installed Falcon player and made a mini sequence for one lone 150 pixel string to test using Vixen 3. I've been watching dozens of you tube vids and manuals (waiting for everything to come in) but haven't really been understanding the proper numbers to place for my channels and universes. Any advice. Short goal is to get one string running and hopefully push it to get a running mega tree.


22 Replies
jlowe
Posts: 952
(@jlowe)
Noble Member
Joined: 16 years ago

Have you tested using the built in 682 tests?

And, if that's your one strand, then you would use universe 1. Since it's 150 pixels long and each pixel is 3 channels, your output 1-1 on the controller would be assigned universe 1, channels 1-450.


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago

One long pixel string of 150 channels would require power injection. It's generally easier to just plug in 3 strings into 3 ports - if your layout permits that.


Reply
Posts: 13
Topic starter
(@jmaverick101)
Eminent Member
Joined: 10 years ago

Attached pics of set up. Tried running 682 test with nothing happening.

IMG 0684
IMG 0685
IMG 0686
IMG 0688
image

Reply
Posts: 91
(@daryl-hurd)
Estimable Member
Joined: 15 years ago

What type of pixels do you have? If they are plugged into port 1-4 they have to be WS2801 or you have ot change your setting to whatever they are. Your pixels could be WS2811, if they are you could also plug them into the 3-1 through 3-4 ports. If you get a light pattern by doing that, just change the pixel type on bank1.


Reply
Page 1 / 5
Share: