Hi all I have an issue kinda probably more of user error. I am setting up my E682 three of them for my pixel tree. So here it goes.
I have three E682 running for my pixel tree. I am using Madrix to control it and my house. So I have the Pixel tree starting at Universe 4 Start channel 374. The tree consist of 39 50 count pixels. Starts in the lower left. When I set up my E682 per the Madrix patch and then just test the strings with the test patterns of the E682 my colors are off. So if I put a test pattern of 1 I get blue. I know these strings are RGB. It also happens on a pixabulb string which is RGB as well. If I set the universes to 1 through 4 for all the clusters and set at a start address of 1 and go from there the test patterns test out fine. This has me confused. I am not sure whats going on, it happens on all three controllers.
Also when looking at my madrix patch the start of my pixel tree is U4 start channel 374 and the end address is U16-100 now the E682 doesn't show it that way. I am not sure what I am missing here. I am running firmware 4.033 too which I updated a couple weeks ago. I have included screen shots of all three controllers web pages.
What am I doing wrong here. It seems pretty straight forward.
Thanks for any input.
Your starting channel has to be either 372, or 375. A pixel has to be set in multiples of 3 or colors will be off count. 374 will not evenly be divided by 3 equally. Don't make the mistake of confusing pixels with channels. A dmx universe in pixel terms supports a max of 170 pixels or 510 channels, but a full dmx universe supports 512 channels but pixels have to be in groups of 3 channels each thus only 510 channels usable for pixels. Hope that makes sense.
John
Thanks for your response. I ended having to goto 376 to get it right.
Oh well, math was off lol. Glad you got it figured our.



