E682 channel questi...
 
Notifications
Clear all

E682 channel question

13 Posts
4 Users
0 Reactions
4,090 Views
Posts: 825
 DanJ
Topic starter
(@danj)
Prominent Member
Joined: 13 years ago

Response to an earlier post---do you mean the "spiral wraps" function in xlights? I will take a look at the manual; that might be just what I need... If I need to do an even number of strings, I can do that. I was going with kind of the "standard" setup as noted on the Boscoyo website--50 pixels per tree gives you a 180 tree. Wouldn't hurt anything to be a bit more than 180.... I'll look into this; this is probably JUST what I need to do. Can't say thanks enough for the replies.
Thanks!!!

Edit--I read the manual; it is the "strands per string" function in xlights... will adjust that to "2" (each string folded once); I guess I will have to identify the strings as 20 pixels long and fold them...
I hadn't looked at the xlights model functions last night; thanks for the replies.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yeah Dan you would have too add 1 more leg on your tree so you have a total of 6 legs so you can set it up as 3 strings 20 pixels 2 legs per string and then the star running off the end of the last string would work and no zig zag setting in controller

DanJ wrote:Response to an earlier post---do you mean the "spiral wraps" function in xlights? I will take a look at the manual; that might be just what I need... If I need to do an even number of strings, I can do that. I was going with kind of the "standard" setup as noted on the Boscoyo website--50 pixels per tree gives you a 180 tree. Wouldn't hurt anything to be a bit more than 180.... I'll look into this; this is probably JUST what I need to do. Can't say thanks enough for the replies.
Thanks!!!

Edit--I read the manual; it is the "strands per string" function in xlights... will adjust that to "2" (each string folded once); I guess I will have to identify the strings as 20 pixels long and fold them...
I hadn't looked at the xlights model functions last night; thanks for the replies.


Reply
Posts: 138
(@brettjm)
Estimable Member
Joined: 13 years ago

What version firmware are you unsing? In the new ver. 5 firmware for the sansdevices E682 you can set the number of pixels to the first zig zag. So if you start wiring your tree with the star and set the number of pixels to the first zig zag to 20 that should solve your problem.


Reply
Page 2 / 2
Share: