Anyone have any idea why a sandevice e682 would keep resetting its static ip address? I have reset it a dozen or more times. Ill be in the middle of running tests and it will reset... very frustrating! Any input would be helpful
Tnx!
Sent from my SM-N975U using Tapatalk
musicman72 wrote:Anyone have any idea why a sandevice e682 would keep resetting its static ip address? I have reset it a dozen or more times. Ill be in the middle of running tests and it will reset... very frustrating! Any input would be helpful
Tnx!Sent from my SM-N975U using Tapatalk
When you set the ip do you save, shut down and then restart?
Sent from my SM-T710 using Tapatalk
Yes. I am saving and rebooting the board
Sent from my SM-N975U using Tapatalk
Which firmware version are you using? Should be 5.030
Yes it is the 5.030
Sent from my SM-N975U using Tapatalk
any chance some other network device competing for that ip?
I'm not really good with networking stuff. My understanding, although very limited, is that once a static ip is assigned that it keeps anything else from conflicting. Even then I have static IP's on everything on that network as it is my show network only. This is why I'm so confused
Sent from my SM-N975U using Tapatalk
you sure your power supply is not glitching?
watch a voltmeter and see if it drops voltage when it resets?
I'll try that
Sent from my SM-N975U using Tapatalk
musicman72 wrote:My understanding, although very limited, is that once a static ip is assigned that it keeps anything else from conflicting.
Sorry, but not true. Static IPs assigned at each device simply assign that IP to the device you are working with.
From time to time devices here, with static IPs assigned, get moved from one show network to another. Unfortunately there is duplication of an IP between two devices. What happens is that one is recognized, the other is not. To rectify, we turn one of the conflicting devices off, then log on to the other. Change the second device to a new IP, then turn the first one back on.
If you have a DHCP server, it works out great to put in manual assignments of IP addresses for the various MAC addresses. In this way, when a device connects to the network it gets the same IP. Very much like setting it statically at each device, but without the hassle of logging on to each unit. It also makes it simple to substitute a new piece of gear for a removed one.
