I want to thank Kev (a board member) for all his help offline with my ESPixelStick setup.
I really didn't understand how to assign universes within FPP for multiple Sticks and he talked me through it.
Here's where I am at:
My matrix has 46080 channels (15360 pixels), the sphere has 150 channels and the eaves outline has 366 channels for a total of 46596 channels.
the matrix starts on universe #1 channel 1 (FPP channel 1)
the sphere starts at universe #91 channel 1 (FPP channel 46081). Set universe #91 boundary for 150.
The eaves starts at universe #92 channel 1(FPP channel 46232). Set universe #92 boundary for 366.
The matrix has always worked perfectly. This year I added a pixel sphere and outlined the eaves with pixels.
Kev got me to the point were I can control each correctly using xlights and FPP.
One little problem remains that I cant correct.
The last 5 pixels of the sphere (universe 91) are the color of the the pixel strand (universe 92) and the last 5 pixels of the strand (universe 92) are not
illuminated.
Something is out of sync. Is it in FPP or the ESPixelStick software setup.
Oh, do I have to setup anything in the xlights "controller" tab? Because right now I have not.
Ideas?
Thanks to everyone in advance
Covewi
That my do it.
xlights has the following:
Matrix channels 1 - 46080
Sphere - 46081 - 46215
Ouline - 46216 - 46578
Thanks
...
Yes. Sounds like your xLights pixel count for the sphere is set for 45 instead of 50. Good catch Mike.
Just like Location, Location, Location for Real Estate, it is Addressing, Addressing, Addressing for controllers and software.
Checked the xlight channels and the sphere matches FPP.
I set the FPP house channels to match xlights and then decreased the number of channels by 15 - wow - the house string works fine.
However, decreasing the sphere by 15 channels makes the matrix bleed over onto the first several channels of the sphere.
If I increase the sphere channel numbers the matrix then bleeds over onto the first and last few channels of the sphere.
Weird
But if xLights was wrong then matching it would make FPP wrong wouldn't it? Is xLights sphere 'Nodes/String' set for 45 or 50?
Its 50.
1 string of 50 nodes and 5 divisions of 10
Covewi
Thank you everyone.
It appears I made a few mistakes and decided to start over.
However, for the heck of it, I switched the model channel order.
Went with: Matrix, House Strand, and finally a 150 channel sphere.
Finally, everything works perfectly. I learned a few valuable lessons and the family is happy the the lights sync.
Again, thanks
Covewi
Congrats for stickin' toit....



