E681 Help ,no data ...
 
Notifications
Clear all

E681 Help ,no data on

11 Posts
8 Users
0 Reactions
3,715 Views
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago
[#22697]

1-2 1-3 1-4 no data

2-3 3-3 4-3 no data

2-4 3-4 4-4 no data

re-flowed and no luck .

Any ideas ?


10 Replies
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

Post screen shots of your setup - both the sequencer and E681.


Reply
pmcpa
Posts: 1390
(@pmcpa)
Noble Member
Joined: 17 years ago

yea, once we see a screen shot we can help


Reply
LightUpMA
Posts: 208
(@lightupma)
Estimable Member
Joined: 15 years ago
angus40 wrote:1-2 1-3 1-4 no data

2-3 3-3 4-3 no data

2-4 3-4 4-4 no data

re-flowed and no luck .

Any ideas ?

First thing is check the pic is still seated properly.

Was it ever working and it stopped?

Do you know if configuration is set properly?

Strings are what you told it they are?

I'd tend to think the data for the cluster of 4 strings is going to string one... Maybe. Please include screen shot of e681 config screen.


Reply
pmcpa
Posts: 1390
(@pmcpa)
Noble Member
Joined: 17 years ago

also make sure test pattern is set to 0


Reply
Lionking_Tx
Posts: 780
(@lionking-tx)
Prominent Member
Joined: 15 years ago

So many little things you do know, but forget can bite you.....

You are using HLS, are you ? Check in the output configuration if the universes have all the channels assigned.
Also check you have 4 strings configured on each cluster of your E681 and that the starting DMX addresses for the cluster are correct.

You said you are using the E681, right ? That should be pretty easy to set - what bit me was setting the DMX/start addresses for the E682 since the universes now spawn over the clusters.

Does the test work (e.g. te 1) ?


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

This is using built in test pattern . This is my #4 of 5 e681's .

Setup is exactly the same as my mega tree e681's > 42 pixels per and correct color order .

I would not post for help if this was an ez solve as config or etc .

I don't want to pull the chips out of my working controllers to test as they are already out in my yard running perfectly .

ps ..... getting blind ... strings command.

disregard help .

Thanks for all replies.


Reply
Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago

Glad you figured it out, I think...

Don't feel too bad -we all get tired, miss something simple, figure it out, and then get blinky.

Keep the faith!


Reply
Posts: 612
(@n-gifford)
Honorable Member
Joined: 15 years ago

No reason to feel bad about that. It usually takes a look from a different approach to realize the simple mistakes that we make, especially after configuring 4 that work great! You can stare at the computer screen all day and overlook the same mistake, then catch it once you've uploaded it for others to see.

Glad it's working!


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

btw - - are you using the default 2.0 gamma correction with the 3001's? I found that 1.8 was quite a bit smoother and provided a better low end...


Reply
Page 1 / 2
Share: