Differential receiv...
 
Notifications
Clear all

Differential receiver design / BOM

4 Posts
3 Users
0 Reactions
996 Views
Posts: 40
Topic starter
(@swanny)
Trusted Member
Joined: 6 years ago
[#55246]

Not sure if the design is open source and I’m just bad at searching or it’s private . Kinda thinking about making a mini (smart?) receiver for next year that repeats the diff pairs and allows you to select a single diff pair to go to a prop along a chain.

Input: Diff pairs in, power
Outputs: pixel string , diff pairs

My usage would be Basically running Ethernet cables outside between windows and being able to set which port is to be used at each location. ( I can easily get power out of the window via small power supply and a flat 14 gauge speaker cable )

Sent from my iPhone using Tapatalk


3 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

The design is not open source. You wil have to design your own...........


Reply
DrNeutron
Posts: 2017
(@drneutron)
Noble Member
Joined: 14 years ago
rstehle wrote:The design is not open source. You wil have to design your own...........

That's not entirely true.....
Scott's designs for a differential receiver are open source and freely available on github.
https://github.com/computergeek1507/PB_16/blob/master/Receiver_Out/README.md
https://github.com/computergeek1507/PB_16/blob/master/Receiver_Out_SMD/README.md
He designed them to work with the PB16 family (which is also open source), but I would say they should work with Kulp and possibly Falcons (as dumb receivers, not smart).


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Oops, thanks for the clarification.


Reply
Share: