Dead esPixelStick?
 
Notifications
Clear all

Dead esPixelStick?

49 Posts
6 Users
0 Reactions
6,172 Views
Posts: 28
Topic starter
(@jackofmanymasterofsome)
Eminent Member
Joined: 5 years ago

It was a dead voltage regulator on the 3.3v side. It was reading .13v. Thank you Shelby for having me check with a multimeter. A new one is going to be shipped to me.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

To get around the 5-3.3v regulator , did you test powering the board with 3.3v on the 3.3v pin ?

I know this won't solve the issue when inserted in the EspixelStick board but it may prove to still be a useful module as
a 3.3v device .


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
JackOfManyMasterOfSome wrote: https://youtu.be/yQd1ZhD4Np4 seems the WeMos board has issues. Can't believe esPixelStick uses these.

This video is great ,as it shows how not to problem solve . He cuts off his nose to spite his face .


Reply
Posts: 28
Topic starter
(@jackofmanymasterofsome)
Eminent Member
Joined: 5 years ago
angus40 wrote:To get around the 5-3.3v regulator , did you test powering the board with 3.3v on the 3.3v pin ?

I don't have anything to provide 3.3v of power directly to the pin. It would be interesting though to see if the chip could be programmed by providing power directly to that pin. I'm sure I could buy a voltage regulator, but I'm behind the 8 ball on getting my lights up!


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
JackOfManyMasterOfSome wrote:I don't have anything to provide 3.3v of power directly to the pin. It would be interesting though to see if the chip could be programmed by providing power directly to that pin. I'm sure I could buy a voltage regulator, but I'm behind the 8 ball on getting my lights up!

If you have a breadboard for testing , either a breadboard power supply that is 5v/3.3v or you could use 2 x AA batteries in series . You should be able to boot the module and load its web url for functionality.

You won't be able to re program though without a ftdi-serial programmer .

Here is a good read .


Reply
Page 9 / 10
Share: