DDP settings when u...
 
Notifications
Clear all

DDP settings when using SD card

32 Posts
4 Users
2 Reactions
3,584 Views
dirknerkle
Posts: 10308
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I'm pretty far out of date here, as I use version 3.2 of the ESP firmware, and only ESP01's. I understand that ESP01S units can use the version 4 firmware, I've read on several occasions that DDP is preferred over multicast. I'd love to see where in the configurations of both the ESP and the PC this DDP thing is configured. I'll assume that it's either on an xLights or Falcon/Pi screen and probably on the network screen of the ESP?


Reply
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

device screen on esps v4. primary input.


Reply
dirknerkle
Posts: 10308
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

That's it? It's a receive function and not something that is configurable at the transmit side?


Reply
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Sorry. I was only addressing the ESPS side. I don't know how to configure on xLights. On Vixen you create a controller of the proper type and patch to it.


Reply
dirknerkle
Posts: 10308
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

So I imagine that using the legacy Vixen 2.1 is a dog that won't hunt with DDP... the only option is to use the J1_SYS plugin in multicast mode....


Reply
Page 4 / 7
Share: