How do I that. That's a new one to me.
Sent from my iPhone using Tapatalk
Thanks jstjohnz that did it. I appreciate all the help. You guys are great.
Sent from my iPhone using Tapatalk
Old thread but I am having similar issue I connected fine before but now I can’t get in shows connected on router but don’t show up address and when I do network scan it don’t show up any ideas ?
Sent from my iPhone using Tapatalk
wilmar wrote:Old thread but I am having similar issue I connected fine before but now I can’t get in shows connected on router but don’t show up address and when I do network scan it don’t show up any ideas
My inclination is that it is a IP address issue. Network scan isn't going to show IPs found on your network outside of your IP range, unless your scanner can detect addresses outside of your intended range. Connect the E682 directly to your laptop, no switch or router in between and reset the E682 to factory settings which will be 192.168.1.206. Set your laptop to an IP address within that range such as 192.168.1.205. You should be able to access the E682 now that you know the IP address, make your changes to the E682 config as needed for the network on your router.
iflights wrote:My inclination is that it is a IP address issue. Network scan isn't going to show IPs found on your network outside of your IP range, unless your scanner can detect addresses outside of your intended range. Connect the E682 directly to your laptop, no switch or router in between and reset the E682 to factory settings which will be 192.168.1.206. Set your laptop to an IP address within that range such as 192.168.1.205. You should be able to access the E682 now that you know the IP address, make your changes to the E682 config as needed for the network on your router.
Got some help from pmiller and what I had to do was the reset button on the e682 as the IP address completely disappeared somehow . Now we are up and running again . Thanks
Sent from my iPhone using Tapatalk
