Can't access E682 s...
 
Notifications
Clear all

Can't access E682 setup screen

15 Posts
7 Users
0 Reactions
4,933 Views
Posts: 121
Topic starter
(@jeremy-jackson28)
Estimable Member
Joined: 11 years ago
[#40799]

Everything was fine. Was working great. Tried to pull it up the next day with I.P address like I had so many times before. But nothing. Have power. Green data light is flashing. Yellow data light on. All LEDs on board are on.
But it keeps telling me Internet Explorer cannot display page. Was wondering if it was the board or the laptop? Does anyone have any ideas?

Sent from my iPhone using Tapatalk


14 Replies
Posts: 297
(@1983ss454)
Reputable Member
Joined: 16 years ago

Sounds like the computer, try rebooting and try it again


Reply
Posts: 121
Topic starter
(@jeremy-jackson28)
Estimable Member
Joined: 11 years ago

I've tried restarting. Turning off and back on. Not sure what else to do.

Sent from my iPhone using Tapatalk


Reply
Posts: 327
(@thebaronn)
Reputable Member
Joined: 17 years ago

I am assuming you are connecting through a router or switch.

I would enter the ip address of the router and go to the devices menu to see if the e682 is showing up.

Now, if it shows up, it should show you its IP address, BOOM!

If it doesn't show up, we have problems.

That how I find mine when I lose them (mostly because I SWEAR it put in 192.168.0.109, but I actually put in 192.168.0.119)

Ip addresses

Reply
Posts: 121
Topic starter
(@jeremy-jackson28)
Estimable Member
Joined: 11 years ago

It's connected straight to laptop. Only had it a week or so. Went to control panel under hardware. But I don't see it in there. Is there another place I should be looking

Sent from my iPhone using Tapatalk


Reply
Page 1 / 3
Share: