Notifications
Clear all

Blown fuse

10 Posts
4 Users
0 Reactions
2,389 Views
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago
[#47318]

Hi everyone I have a blown fuse on one port of my controller any trouble shooting advice? It's a sandevice 6804.


9 Replies
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
Dkelly0802 wrote:Hi everyone I have a blown fuse on one port of my controller any trouble shooting advice? It's a sandevice 6804.

Put in new fuse and turn on. If fuse doesn't blow then try a string of lights. You might want to check to make sure you're not shorted to ground. Bad solder or solder bridge.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago

I'll try that tomorrow. It was working this afternoon but when I turned it on tonight no lights on that port. I'm having one of those what can go wrong will go wrong weeks. I have no idea what to look for to see what shorted out or why the fuse blew.


Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago
Dkelly0802 wrote:Hi everyone I have a blown fuse on one port of my controller any trouble shooting advice? It's a sandevice 6804.

Double check you power connections especially if you have power injection. If any of those are inadvertently reversed, you'll blow a fuse. While making up hundreds of connectors, I did it three times.


Reply
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago

Would that be the most likely cause? I have no injection but will have to check my pigtails.


Reply
Page 1 / 2
Share: