When you get home tonight open your display preview setup screen. Then in the left column find the elements that are patched to the strings in question. Then open the element and click on each pixel in the left column. The dot in the preview associated with that pixel will turn pink if it is linked. Make sure only 1 dot in the preview is linked to a channel, unless you intentionally wanted more. Do this for all the pixels in question. This will verify if the pixels are mapped properly in the preview setup. If the position or order is wrong then the effects in the sequence will not render properly in the actual display.
Remember, when sequencing in V3 the Display Preview is used to render effects such as wipes based on pixel positions in the preview. If your elements are not located in the preview as they are in the actual display the effects will look fine in the preview but not in the actual display.
I hope that was not too confusing.
Not confusing at all , I haven't checked that yet .
I kept thinking I had a patching problem so you may be on to something!
I'll check it tonight.
If this were Xlights, I'd say that you had conflicting/overlapping channels or universes on two of the strands. The rightmost strand at the "rear" bank of icicles on the house and the rightmost strand of the "front" bank of icicles light up at the same time and appear to be duplicating effects between them. I don't know if Vixen acts the same with channel overlaps.
It looks like the numbering on the display pixels counts are off and I forgot to add the additional strand I needed in the front!
I still need to finish it and download everything but it was definitely an issue .
The display configuration is more integrated into the outputs than I realized. This is my second year with pixels so I'm still on the learning curve!
Thanks to everyone for putting me on the right track! I'll update in a few days .
Just an update. After re-numbering all the pixels in the display layout it worked fine.
I learned something new about pixels and Vixen.
Many thanks to Brian and Martin for their help!
