Best patching metho...
 
Notifications
Clear all

Best patching method

15 Posts
5 Users
0 Reactions
3,837 Views
yosemite
Posts: 289
Topic starter
(@yosemite)
Reputable Member
Joined: 17 years ago

Okay, it is said that a pictire is worth a thousand words so here goes:

This is what I've been trying to explain above. Does anyone have any ideas?
Martin, see if this is what you what you thought it was above. I have not tried what you suggested above yet I wanted to get this posted and the show is running.


Reply
Posts: 602
Guest
(@bwinter)
Honorable Member
Joined: 10 years ago

What software are you using to sequence?


Reply
yosemite
Posts: 289
Topic starter
(@yosemite)
Reputable Member
Joined: 17 years ago

Vixen 3.4.5 , going to a FPP then to a Falcon F16V3.
I have also run this with only the laptop and the F16V3 with the same results.


Reply
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

By watching the video I think there are 2 possibilities. 1 is that the pixel setup in the Display Preview is not correct. My 2nd guess would be that the strings that are acting wacky are not connected properly. Switched connection ports or the like. I am leaning more towards the Display Preview setup though.


Reply
yosemite
Posts: 289
Topic starter
(@yosemite)
Reputable Member
Joined: 17 years ago

Brian, Can you give me an example of what I should be looking for ?
I'll have to check them when I get home from work, But I think they're setup as one string per section of roof.


Reply
Page 2 / 3
Share: