Notifications
Clear all
Feb 05, 2016 8:25 pm
I must have it right according to my last post because the star now works.
Feb 08, 2016 3:04 pm
your layout is correct now. Awesome job
Feb 21, 2016 10:55 pm
On the E682 do you have to use the ports in order? 1-1 then 1-2 then 1-3 or can you skip? 1-1 then 1-3 then 3-4?
Feb 21, 2016 11:09 pm
I use 1-1 to 1-4 and then 3-1 to 3-4 for my Megatree. The first 8 outputs use a 12 volt power supply and the second set of 8 uses another 12 volt supply.
Sent from my Nexus 7 using Tapatalk
Feb 22, 2016 8:36 am
AdamZ wrote:On the E682 do you have to use the ports in order? 1-1 then 1-2 then 1-3 or can you skip? 1-1 then 1-3 then 3-4?
Yes and No. But to make this a short answer just wait for version 5 of the firmware to be released, it will allow you to set it up like your example of skipping outputs. Here is link to the thread.
Page 3 / 3
Prev
