Notifications
Clear all

50 pixels

11 Posts
6 Users
0 Reactions
4,643 Views
Posts: 69
Topic starter
(@parkej60)
Estimable Member
Joined: 11 years ago
[#43343]

I'm looking for a solution that runs a single channel of pixels, approx 50, through a raspberry Pi. Want something that can be hidden behind a indoor xmas tree but still sequenced.

Thanks for your suggestions.

Sent from my iPhone using Tapatalk


10 Replies
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

The raspi can run two channels of 800 pixels (1600 total) directly out its GPIO port. All you need is either a pre-made piCap or if you can solder, get a 74htc125 chip from adafruit, a piece of perf board and 14p socket from somewhere (Radio Shack). You will, of course, need a power supply for the pixels. The pi can't power them.

And here is one mounted on a 3D printed board along side a raspberry pi:


Reply
Posts: 69
Topic starter
(@parkej60)
Estimable Member
Joined: 11 years ago

Thats pretty cool. Will need to wait for one of the PiHats to come available.

Sent from my iPhone using Tapatalk


Reply
Posts: 69
Topic starter
(@parkej60)
Estimable Member
Joined: 11 years ago

Just ordered!

Sent from my iPhone using Tapatalk


Reply
Posts: 8
(@frodeaux)
Active Member
Joined: 13 years ago

what type of pixels are our running, just curious?


Reply
Page 1 / 3
Share: