Pic programing prob...
 
Notifications
Clear all

Pic programing problems

13 Posts
5 Users
0 Reactions
5,939 Views
Posts: 2214
(@ctmal)
Famed Member
Joined: 19 years ago

I think Budude has your issue. If you are daisychaining your 2nd Ren 64 off of your 1st one(a cat5 cable from Ren1 to Ren2) then you just want to have 1 Renard plugin in your sequences set to channels 1-128.


Reply
steve_hirst
Posts: 296
(@steve-hirst)
Reputable Member
Joined: 17 years ago

Ok, I have seen this one.. you are plugged into the transmit cat5 connector on at least the first board. change that and you should be good to go. look at the wiki for the right connections.


Reply
Dave Burrows
Posts: 84
Topic starter
(@dave-burrows)
Estimable Member
Joined: 17 years ago

Thank you all for your help on this, because this DODO:confused: stuffed up.

Yes it was the plugin set up that required modifing. Use 1 renard dimmer with 128 channels.
I was reading about the wirless rens and got confused.

So thanks again.

Now i can spend some time and play with the pickit3 and trying to flash pics properly...hahaha

Thanks
Dave


Reply
Page 3 / 3
Share: