REN-C PIC HEX file
 
Notifications
Clear all

REN-C PIC HEX file

13 Posts
7 Users
0 Reactions
7,439 Views
sparky588
Posts: 248
Topic starter
(@sparky588)
Reputable Member
Joined: 17 years ago
[#12737]

Dose anyone have the REN-C HEX file. i tried to make it but it dosent operate. I'm new at the RENARD boards and am tring to get my OLSEN
595 to dim. Right now its not doing anything

Thanks

P.S. dose it operate at the 56000 baud rate to?


12 Replies
Posts: 115
(@barnettd)
Estimable Member
Joined: 18 years ago

Go to :

doityourselfchristmas.com/wiki page

click on Electronics Hardware

then to the Renard link

then the Renard-595 converter link

then find the link to take you to the Firmware.

There is lots of information on what you want to do with the 595 converter there....

Hope this helps


Reply
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

YEs runs at 57600

If you need the firmware let me know I have both the published and a beta version in HEX format


Reply
sparky588
Posts: 248
Topic starter
(@sparky588)
Reputable Member
Joined: 17 years ago

I found my problem. i forgot to install the J1 jumper on the Olsen595 board. all works now


Reply
DaveJZ
Posts: 974
(@davejz)
Noble Member
Joined: 16 years ago

I know this is bringing an old post alive but didn't want to start a new one since this one was there.

I'm trying to build a .Hex for the REN C but cannot get it to build from the wiki asm. Looking for help. This is what I get when I try to build

Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "C:\Program Files\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F627A "Renard-595-192-20090505a.asm" /l"Renard-595-192-20090505a.lst" /e"Renard-595-192-20090505a.err" /o"Renard-595-192-20090505a.o"
Error[113] C:\USERS\ZYLA FAMILY\DESKTOP\RENARD-595-192-20090505A.ASM 90 : Symbol not previously defined (_DATA_CP_OFF)
Skipping link step. Not all sources built successfully.

If anyone can help me that would be great... Or if someone would happen to have the .hex already and could post that would be great.. Please let me know


Reply
Page 1 / 3
Share: