I have a second generation JDM PIC programmer by KEE Electronics and using WINPIC800 trying to program PIC16F688 but have been unsuccessful.
Has anyone had success on this PIC using this JDM programmer? - If so, what shoftware did you use?
I am hoping not to have to buy a different programmer just for the 6 chips in my 48LSD - and time is getting short1
Anyone in the Tampa,FL area that would be willing to program 6 of these chips for me?
I have had success with other PDM programmers. I use http://www.members.aon.at/electronics/pic/picpgm/ .
They are a bit quirky though. I've found that you have to use a local serial port. Usb to serial adapters won't work(at least for me). Also, you want to have the programmer plugged in when you start the software but with no pic in the programmer. After the software starts up you can go ahead and put a pic in.
Are you getting any errors?
I am in Port Richey. I don't have 6 pics but I will check. If I do I will send them to you and you just send 6 back.
Dave
Thanks, gdyrdave - I hope to have the board tested this weekend and move on to designing the display,
Let us know how it works out. Glad to be of assistance.
Dave
